![]() |
ls motor conversion brackets
1 Attachment(s)
up for sale i have these new brackets and mounts conversion kit from cpp for 1967 to 1972 c/10 trucks to fit the gm ls family engines , $150.00 shipped
|
Re: ls motor conversion brackets
Raul's- do you have pictures of them installed? I'm trying to figure out what setup to do in my 68 when I upgrade to a 6.0. Also, I would appreciate your comments in this thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=551464 Thanks, Rob Posted via Mobile Device |
Re: ls motor conversion brackets
1 Attachment(s)
here you go rob !!! in these pix its just the brackets moked on without mounts and the plates that bolt onto engine
|
Re: ls motor conversion brackets
Raul - do you have the plates that bolt to the motor also?
|
Re: ls motor conversion brackets
1 Attachment(s)
sorry i guess i should've post this also , yes i do and all hardware in its original package !!!!!!!
|
Re: ls motor conversion brackets
Do you have a part number for the LS plates that bolt on to the motor? Apparently there are 3 different versions which place the engine in different positions.
|
Re: ls motor conversion brackets
there are no numbers on the plates , this is the kit from cpp ,i guess ill call them later to ask
|
Re: ls motor conversion brackets
mine are the ls1k3 which moves the engine 3 inches foward , here is the link that shows illustrations on all brackets ,
http://www.classicperform.com/Instru...PDF/LS1-K3.pdf |
Re: ls motor conversion brackets
So what oilpan does this work with?
|
Re: ls motor conversion brackets
So these are only for LS1 engines?..
|
Re: ls motor conversion brackets
2 Attachment(s)
Quote:
Quote:
hope this helps , this set up is for ls1 oilpan on pix no# 1 , i was going to use a truck ls motor pix #2 which has a pan that sits even further back with more crossmember clearance |
Re: ls motor conversion brackets
Quote:
|
Re: ls motor conversion brackets
Just to clarify...This included the mounts, tubular stands, ls1k3 plates, all the bolts & hardware + shipping, correct?
If so, I think I'll take 'em. Thanks, Ed |
Re: ls motor conversion brackets
Quote:
|
All times are GMT -4. The time now is 01:30 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com