The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   brake time for the 02 burb. need pad ideas (https://67-72chevytrucks.com/vboard/showthread.php?t=557805)

blackbeaSSt 12-26-2012 11:18 AM

brake time for the 02 burb. need pad ideas
 
first time since we've owned it that the brakes will need to be done.

are all pads created equal for this beast?

im looking at these for the front and these for the rear for about $80+ tax.

hyatt 12-26-2012 11:38 AM

Re: brake time for the 02 burb. need pad ideas
 
If you buy at part store they usually have 3 grades always buy the BEST Money well spent If not go to dealer and buy oem There is a difference

blackbeaSSt 12-26-2012 11:52 AM

Re: brake time for the 02 burb. need pad ideas
 
Quote:

Originally Posted by hyatt (Post 5778326)
If you buy at part store they usually have 3 grades always buy the BEST Money well spent If not go to dealer and buy oem There is a difference

as far as exact fit those look to be the best advance auto has to offer with good ratings. they are about $65 a set. then there is a $50 off coupon code to make them $80+ tax

blackbeaSSt 12-26-2012 12:11 PM

Re: brake time for the 02 burb. need pad ideas
 
but then again i can get these for the front and these for the rear for about $45 +tax

or the platinum version for about $60 +tax

blackbeaSSt 12-26-2012 02:19 PM

Re: brake time for the 02 burb. need pad ideas
 
ok i talked to my mechanic and he said that if ceramic pads aren't recommended that he wouldn't suggest putting them on due to the squeaking affect it might cause.

so are ceramics ok to put on or the semi-metallic?

crazy longhorn 12-26-2012 05:19 PM

Re: brake time for the 02 burb. need pad ideas
 
I used the Wagner themo quiets on my o2 silverado, & am happy with the set:chevy: crazyL

blackbeaSSt 12-26-2012 07:03 PM

Re: brake time for the 02 burb. need pad ideas
 
Quote:

Originally Posted by crazy longhorn (Post 5778762)
I used the Wagner themo quiets on my o2 silverado, & am happy with the set:chevy: crazyL

i popped for the wearever gold series for $47 total. guess i'll see what happens :smoke:

Boog 12-26-2012 09:21 PM

Re: brake time for the 02 burb. need pad ideas
 
I ran the Wagner Ceramics for years on my 97 Burb and loved them. Quiet and low dust emitting.

blackbeaSSt 12-27-2012 12:34 PM

Re: brake time for the 02 burb. need pad ideas
 
Quote:

Originally Posted by Boog (Post 5779158)
I ran the Wagner Ceramics for years on my 97 Burb and loved them. Quiet and low dust emitting.

yeah i decided to go with the cheapies for now. if they suck or squeal then i'll try the wagners.

bighaas79 12-27-2012 02:41 PM

Re: brake time for the 02 burb. need pad ideas
 
i too went the thermo quiet on my 02 1500hd front and rear. went thru 2 sets of annoying screeching with them. (the old brakes were silent just getting worn) Even with all new rotors, pads, clips, cleaned and greased properly they would be fine for about a week and a half then start screeching. finally made them warranty from the thermo quiets to perfect stops. Been alot happier with those than the thermo quiets.


All times are GMT -4. The time now is 08:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com