Eaton HO52 rear end w/ trailing arms!!!
 

sold locally

I've got an Eaton HO52 rear end with 3/4 ton long bed trailing arms. Rear end is complete, drum to drum, with 4.10 gears open. With e-brake cables, ready to bolt in. sold pick up only!!! I'll throw in the drive shaft, for th400.
3rd member
https://lh4.googleusercontent.com/-Z...s720/photo.JPG

https://lh5.googleusercontent.com/-F...512/photo1.JPG

Re: Eaton HO52 rear end w/ trailing arms!!!
 

ttt

Re: Eaton HO52 rear end w/ trailing arms!!!
 

If someone just needs the 3rd member, they can pick it up for 75.00 bucks!!

Re: Eaton HO52 rear end w/ trailing arms!!!
 

did the truck have a dually conversion? i don't recognize those spacers outboard of the brake drums. be a slick way to increase the rear track width on my 72 Burb C20 which is kinda narrow imo.

Re: Eaton HO52 rear end w/ trailing arms!!!
 

Nope, that's the way I ran it on my truck, or I should say that's the way it came when I bought it. Wheels lined up fine, front and rear.

Re: Eaton HO52 rear end w/ trailing arms!!!
 

I don't know enough about these to give an accurate answer. thinking about it for a minute, it does look different than the rear end I took this 3rd member from, but I can't recall for sure.

Re: Eaton HO52 rear end w/ trailing arms!!!
 

hmmm...maybe someone will clue me in to what those are and what they are doing on a 3/4 ton axle with coils/trailing arms.

Re: Eaton HO52 rear end w/ trailing arms!!!
 

Would you sell the trailing arms?

Re: Eaton HO52 rear end w/ trailing arms!!!
 

I will, but I don't know about shipping them to Canada. Could be very costly.

Re: Eaton HO52 rear end w/ trailing arms!!!
 

I have the exact same rear end in a 71 C 20 and the pieces that look to be spacers are GM stock and are made to the drum. As ScottG stated the wheels fit as they should. No extra rear width. I always thought 3/4 ton trucks were leaf sprung but as I have purchased a few C 20 trucks I have seen more of them coil sprung.
Posted via Mobile Device

Re: Eaton HO52 rear end w/ trailing arms!!!
 

$150.00!!! for the rear end, trailing arms, and I'll even throw in the drive shaft!!! Come and get it!!

Re: Eaton HO52 rear end w/ trailing arms!!!
 

Will you ship the 3rd member and hubs? I am too far away to pickup.

Mark
Lakeside MT
Posted via Mobile Device

Re: Eaton HO52 rear end w/ trailing arms!!!
 

I can. It's roughly 130 pounds or so, so it will be costly to ship. By the hubs do you mean the part pressed into the drums?

Re: Eaton HO52 rear end w/ trailing arms!!!
 

I do, although I don't need the drums, just the srw hubs & bearings.

The best way to ship is probably Greyhound to Kalispell, MT.

My email is msletto@crowleyfleck.com
Posted via Mobile Device

Re: Eaton HO52 rear end w/ trailing arms!!!
 

I would be interested in the center section shipped to zip 08721 if it gets to me.
thanks,
Tony
Posted via Mobile Device

Re: Eaton HO52 rear end w/ trailing arms!!!
 

gonna get it apart tomorrow. Too heavy for Greyhound. (135 lbs!) Maybe Ups.

Re: Eaton HO52 rear end w/ trailing arms!!!
 

sold locally.