CA Eaton HO52 rear end w/ trailing arms!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ScottG · 12-31-2012, 02:20 PM

sold locally

I've got an Eaton HO52 rear end with 3/4 ton long bed trailing arms. Rear end is complete, drum to drum, with 4.10 gears open. With e-brake cables, ready to bolt in. sold pick up only!!! I'll throw in the drive shaft, for th400.
3rd member

ScottG · 01-02-2013, 07:37 PM

ttt

ScottG · 01-08-2013, 02:11 PM

If someone just needs the 3rd member, they can pick it up for 75.00 bucks!!

capev86 · 01-08-2013, 06:32 PM

did the truck have a dually conversion? i don't recognize those spacers outboard of the brake drums. be a slick way to increase the rear track width on my 72 Burb C20 which is kinda narrow imo.

ScottG · 01-08-2013, 07:11 PM

Quote:

Originally Posted by capev86

did the truck have a dually conversion? i don't recognize those spacers outboard of the brake drums. be a slick way to increase the rear track width on my 72 Burb C20 which is kinda narrow imo.

Nope, that's the way I ran it on my truck, or I should say that's the way it came when I bought it. Wheels lined up fine, front and rear.

ScottG · 01-08-2013, 07:25 PM

I don't know enough about these to give an accurate answer. thinking about it for a minute, it does look different than the rear end I took this 3rd member from, but I can't recall for sure.

capev86 · 01-08-2013, 07:26 PM

hmmm...maybe someone will clue me in to what those are and what they are doing on a 3/4 ton axle with coils/trailing arms.

Marcello D'Ottavio · 01-08-2013, 08:31 PM

Would you sell the trailing arms?

ScottG · 01-09-2013, 11:42 AM

Quote:

Originally Posted by Marcello D'Ottavio

Would you sell the trailing arms?

I will, but I don't know about shipping them to Canada. Could be very costly.

**Belairboy55** · 01-09-2013, 02:20 PM

I have the exact same rear end in a 71 C 20 and the pieces that look to be spacers are GM stock and are made to the drum. As ScottG stated the wheels fit as they should. No extra rear width. I always thought 3/4 ton trucks were leaf sprung but as I have purchased a few C 20 trucks I have seen more of them coil sprung.
Posted via Mobile Device

ScottG · 01-31-2013, 02:49 PM

$150.00!!! for the rear end, trailing arms, and I'll even throw in the drive shaft!!! Come and get it!!

A5window · 02-03-2013, 10:56 PM

Will you ship the 3rd member and hubs? I am too far away to pickup.

Mark
Lakeside MT
Posted via Mobile Device

ScottG · 02-03-2013, 11:28 PM

Quote:

Originally Posted by A5window

Will you ship the 3rd member and hubs? I am too far away to pickup.

Mark
Lakeside MT
Posted via Mobile Device

I can. It's roughly 130 pounds or so, so it will be costly to ship. By the hubs do you mean the part pressed into the drums?

A5window · 02-04-2013, 12:41 AM

I do, although I don't need the drums, just the srw hubs & bearings.

The best way to ship is probably Greyhound to Kalispell, MT.

My email is msletto@crowleyfleck.com
Posted via Mobile Device

tow guys · 02-05-2013, 08:30 PM

I would be interested in the center section shipped to zip 08721 if it gets to me.
thanks,
Tony
Posted via Mobile Device

ScottG · 02-06-2013, 07:21 PM

Quote:

Originally Posted by A5window

I do, although I don't need the drums, just the srw hubs & bearings.

The best way to ship is probably Greyhound to Kalispell, MT.

My email is msletto@crowleyfleck.com
Posted via Mobile Device

gonna get it apart tomorrow. Too heavy for Greyhound. (135 lbs!) Maybe Ups.

ScottG · 02-10-2013, 06:05 PM

sold locally.

12-31-2012, 02:20 PM	#1
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Eaton HO52 rear end w/ trailing arms!!! sold locally I've got an Eaton HO52 rear end with 3/4 ton long bed trailing arms. Rear end is complete, drum to drum, with 4.10 gears open. With e-brake cables, ready to bolt in. sold pick up only!!! I'll throw in the drive shaft, for th400. 3rd member __________________ '67 C20 LBW Last edited by ScottG; 02-10-2013 at 06:06 PM. Reason: ADD PICS lower price

01-02-2013, 07:37 PM	#2
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: Eaton HO52 rear end w/ trailing arms!!! ttt __________________ '67 C20 LBW

01-08-2013, 02:11 PM	#3
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: Eaton HO52 rear end w/ trailing arms!!! If someone just needs the 3rd member, they can pick it up for 75.00 bucks!! __________________ '67 C20 LBW

01-08-2013, 06:32 PM	#4
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: Eaton HO52 rear end w/ trailing arms!!! did the truck have a dually conversion? i don't recognize those spacers outboard of the brake drums. be a slick way to increase the rear track width on my 72 Burb C20 which is kinda narrow imo.

01-08-2013, 07:25 PM	#6
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: Eaton HO52 rear end w/ trailing arms!!! I don't know enough about these to give an accurate answer. thinking about it for a minute, it does look different than the rear end I took this 3rd member from, but I can't recall for sure. __________________ '67 C20 LBW

01-08-2013, 07:26 PM	#7
capev86 Registered User Join Date: May 2009 Location: Eliot, Maine Posts: 1,314	Re: Eaton HO52 rear end w/ trailing arms!!! hmmm...maybe someone will clue me in to what those are and what they are doing on a 3/4 ton axle with coils/trailing arms.

01-08-2013, 08:31 PM	#8
Marcello D'Ottavio Registered User Join Date: Jul 2012 Location: Winnipeg, Manitoba, Canada Posts: 18	Re: Eaton HO52 rear end w/ trailing arms!!! Would you sell the trailing arms?

01-09-2013, 02:20 PM	#10
Belairboy55 Active Member Join Date: Jul 2012 Location: Lake Charles la Posts: 172	Re: Eaton HO52 rear end w/ trailing arms!!! I have the exact same rear end in a 71 C 20 and the pieces that look to be spacers are GM stock and are made to the drum. As ScottG stated the wheels fit as they should. No extra rear width. I always thought 3/4 ton trucks were leaf sprung but as I have purchased a few C 20 trucks I have seen more of them coil sprung. Posted via Mobile Device

01-31-2013, 02:49 PM	#11
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: Eaton HO52 rear end w/ trailing arms!!! $150.00!!! for the rear end, trailing arms, and I'll even throw in the drive shaft!!! Come and get it!! __________________ '67 C20 LBW

02-03-2013, 10:56 PM	#12
A5window Registered User Join Date: Sep 2012 Location: Kalispell, MT Posts: 2	Re: Eaton HO52 rear end w/ trailing arms!!! Will you ship the 3rd member and hubs? I am too far away to pickup. Mark Lakeside MT Posted via Mobile Device

02-04-2013, 12:41 AM	#14
A5window Registered User Join Date: Sep 2012 Location: Kalispell, MT Posts: 2	Re: Eaton HO52 rear end w/ trailing arms!!! I do, although I don't need the drums, just the srw hubs & bearings. The best way to ship is probably Greyhound to Kalispell, MT. My email is msletto@crowleyfleck.com Posted via Mobile Device

02-05-2013, 08:30 PM	#15
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: Eaton HO52 rear end w/ trailing arms!!! I would be interested in the center section shipped to zip 08721 if it gets to me. thanks, Tony Posted via Mobile Device __________________ Check out my 70 GMC tow truck project here.......http://67-72chevytrucks.com/vboard/s...d.php?t=440431 Member of the 1-Ton Club! http://www.eastcoastcarandtruck.org

02-10-2013, 06:05 PM	#17
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: Eaton HO52 rear end w/ trailing arms!!! sold locally. __________________ '67 C20 LBW



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.