The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   At the junkyard, have a question (https://67-72chevytrucks.com/vboard/showthread.php?t=559443)

LSUMurse 01-06-2013 03:12 PM
At the junkyard, have a question
 
1 Attachment(s)
Will this clutch fan fit in my '68?
Donor is a '81 C10 with a V8. I have a 307.
Posted via Mobile Device
Posted via Mobile Device

jsbgump 01-06-2013 03:27 PM
Re: At the junkyard, have a question
 
I believe the bolt pattern is the same
Posted via Mobile Device

69GWC 01-06-2013 04:36 PM
Re: At the junkyard, have a question
 
So long its a 18" or 17" I believe.
Posted via Mobile Device

hugger6933 01-06-2013 06:30 PM
Re: At the junkyard, have a question
 
Your cleared for take off

Andy4639 01-06-2013 07:22 PM
Re: At the junkyard, have a question
 
Get the fan pulleys and anything else they have for that setup. It will be fine.

LSUMurse 01-06-2013 09:30 PM
Re: At the junkyard, have a question
 
Thanks for the quick responses and info. Once I got it off I could see where the fan had been rubbing against the shaft. So, I didn't take it, but I'll know for next time.
Thanks again,
-Stephen
Posted via Mobile Device


All times are GMT -4. The time now is 11:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com