The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Van Tilt (https://67-72chevytrucks.com/vboard/showthread.php?t=56256)

cdowns 06-11-2003 02:18 PM

Van Tilt
 
i have a van tilt in good usable condition came out of I THINK 78 1ton van $120 shipping included to the 48states only if interested give me email address and i'll send pictures

69chevyc20 06-12-2003 09:31 AM

cb6d@planttel.net

cdowns 06-12-2003 07:41 PM

forgot to mention this has a cruise-control in the turnsignal lever, but it's just a 1wire deal to disconnect[or you can use it for a switch for a horn or setup a set of spots that you can use for flickin on and off with your fingertip!! disconnecting the 1wire and you can use the regular turn lever

Longhorn Man 06-12-2003 08:00 PM

Not to jump on his thread, but the cruise controll switch can actually controll 2 seperate items. It is a 3 position switch, off, 1/2 way in (one item) and all the way in (second item).
Also, with the steering wheel off, you can remove it and all its wireing and install your stock turn signal switch very easily.

cdowns 06-12-2003 08:57 PM

hey i just looked again and longhorns right !! but you dont have to change the turnsignal switch just the lever to a normal lever if you don't want the cruise lever


All times are GMT -4. The time now is 09:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com