Hazard Switch Stuck on ?
 

Remember when you where told to "Look But Don't Touch" ! Well I pushed the hazard switch in on my 71 GMC, Good news is it everything works, all lights are blinking ! But when I go to pull the switch back out, It won't budge, Not a bit, WTF is going on ? Pulled the relay to get lights to stop blinking, Anyone had this happen ? I figure it must be the first time the switch was used since Nixon was in the White House......:gmc2:.....Thanks Guy's Have a nice Weekend !
Posted via Mobile Device

Re: Hazard Switch Stuck on ?
 

yep...me too...the truck had sat for 15 years...everything worked great. Had to use plyers to get it unstuck and broke the switch. Yea! Now i get to tear into the column.

Try some wd40 sprayed in there first...will also help your shifter if it is jancky. I could hardly shift out of park.

Re: Hazard Switch Stuck on ?
 

Glad you mentioned that ! My column auto shifter is real hard to move too ? What is proper way to lube the shift linkage ?...thanks have a good one ! Rain today, snow last week:uhmk:
Posted via Mobile Device

Re: Hazard Switch Stuck on ?
 

mine has a new turn signal switch, and its hard to pull out also....just pull harder and lube it up some...and try not to use it much....good luck.

Re: Hazard Switch Stuck on ?
 

Is there any update on unsticking the hazard light button? Pressed mine today, and the hazards are stuck on. I unscrewed the mounting screw and removed the whole button but that did not fix the problem.

Re: Hazard Switch Stuck on ?
 

I also have a question concerning the hazard switch, who sells a good replacement. I have two columns and both hazard buttons are broke. I plan on painting the no-shift column this winter and hope to replace the button.

thanks

Re: Hazard Switch Stuck on ?
 

WES or GMC Paul. I would stick with a board vendor that deals daily with our trucks and not just a mail order company that never had a column apart before.
Might try some penetrating oil, sewing machine oil, or even brake cleaner. Most of the column's I have had apart had lithium type grease hard caked on the switch causing them to be stubborn. A squirt of WD 40 after a few minutes freed the switch. After 40+ years you would be stubborn n brittle too.