The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)

- - Instrument Panel Needles (https://67-72chevytrucks.com/vboard/showthread.php?t=562877)

Hosedragger622

01-26-2013 12:17 PM

Instrument Panel Needles

i got a 2004 GMC 2500 and the trans. temp gauge needle is stuck straight down and will not move, the tach shows 6000 rpm regardless of highway speeds or at idle, whats the fix or is just a replacement thing?

nxtlevl

01-26-2013 01:16 PM

Re: Instrument Panel Needles

Sounds like the typical "stepper motor" problem these dash gauges are plagued with...Can't remember right off hand, but there are people out there that will repair them....

truckdude239

01-26-2013 02:19 PM

Re: Instrument Panel Needles

http://67-72chevytrucks.com/vboard/s...d.php?t=511327

All times are GMT -4. The time now is 02:04 AM.