4x4 Spicer Lockout, spindles, hubs
 

I have some leftovers from my front axle rebuild on a 72 dana 44. I will list what all is here since it may be hard to see in the picture.

1. Spicer lockout that is slightly scratched, working
1. Spicer lockout heavily scratched, center broken, but still working
2. Inner lockout gear locks (not sure what there called), both work
1. push in device
1. screw down plate
1. axle snap ring
1. outter c ring
1. spindle nut washer
2. inner spindle nuts
1. outer spindle nut
9-10 lockout screws
2. spindles. 1 has some slightly damaged threads, could be easily chased/filed to make work.
2. Hubs, both had holes drilled for grease fittings, I have welded one shut, other still needs welded shut.

*cliffs notes* enough to make one side work, with some left overs.

How does 25 plus shipping sound? Its gonna cost a fortune to ship due to weight I am guessing.

Re: 4x4 Spicer Lockout, spindles, hubs
 

i'm interested can you get a cost on shipping to 06705?

Re: 4x4 Spicer Lockout, spindles, hubs
 

UPS is saying around 50 dollars for shipping. So 75 to your door step.

Re: 4x4 Spicer Lockout, spindles, hubs
 

Thanks I'll pass.

Re: 4x4 Spicer Lockout, spindles, hubs
 

USPS flat large rate - fits it ships for 15 Bucks!!!!!!

Good deal if I needed em.

Re: 4x4 Spicer Lockout, spindles, hubs
 

i would do it if you can do the usps large flat rate box.....lmk

Re: 4x4 Spicer Lockout, spindles, hubs
 

I will have to go get a box and see. The largest one I have seen, this wont fit into it.

Re: 4x4 Spicer Lockout, spindles, hubs
 

no rush on this end...i will get in line behind 72swbcamo

Re: 4x4 Spicer Lockout, spindles, hubs
 

Ok, grabbed 2 boxes.

The priority mail large flat rate box, wont fit.
The largest "priority mail" box, will fit. But its even more expensive then ups.
If I put it in my own box, thru the post office, "standard post", its 35 bux shipping to 72swbcamo if he still wishes.

What is killing this is the hubs. They are the bulkiest item, and also weight the most at around 10lbs EACH.

Re: 4x4 Spicer Lockout, spindles, hubs
 

Nobolt, thanks for you consideration, It was a great showing of being a good person our mother brought yup right. I'm still going to pass i was only going to get them to have spare parts on hand. Thank again.

Re: 4x4 Spicer Lockout, spindles, hubs
 

Thanks for responding back 72.

Nobolt, your choice, or if you have other shipping ideas, I'm willing to listen.

Re: 4x4 Spicer Lockout, spindles, hubs
 

i'm going to pass as well. thank you

Re: 4x4 Spicer Lockout, spindles, hubs
 

hey there! wondering if you still have these parts, I am in need of a hub as one of mine spun the outer race and have been told a new race cannot be pressed in...I will send you a private msg as well, thanks