56 Mild Custom Build
 

Here's my 56 Chevy that I'm restoring.

Truck the day I bought it on Feb 12 2013
http://i1320.photobucket.com/albums/...psc9bdaf0a.jpg

http://i1320.photobucket.com/albums/...psf85a5781.jpg

http://i1320.photobucket.com/albums/...ps0c54a5cf.jpg

The next day making sure the small block runs
http://i1320.photobucket.com/albums/...ps9407b025.jpg

Pulled the engine n trans
http://i1320.photobucket.com/albums/...ps0a9e3df3.jpg

Day 3
http://i1320.photobucket.com/albums/...ps2fc007e6.jpg
http://i1320.photobucket.com/albums/...ps9ff91953.jpg

Driver door rust
http://i1320.photobucket.com/albums/...ps018cede9.jpg

Lower door skin installed
http://i1320.photobucket.com/albums/...ps5eacedfc.jpg
Posted via Mobile Device
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Shaved the firewall
http://i1320.photobucket.com/albums/...psc865662b.jpg

One piece window installed the right way. Rolls up and down nice and smooth and the glass dosent rattle
http://i1320.photobucket.com/albums/...psdf9a819d.jpg
http://i1320.photobucket.com/albums/...ps8cd1f6d6.jpg

Driver and passenger step panel installed
http://i1320.photobucket.com/albums/...psa0069cce.jpg

Stripped the dash found a ding with a hole. Pulled out the ding welded up the hole. Alittle filler I'll sand it later
http://i1320.photobucket.com/albums/...psa632f1ca.jpg
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Stripping the body down to metal
http://i1320.photobucket.com/albums/...ps63a550a4.jpg
http://i1320.photobucket.com/albums/...ps9ff4cbf1.jpg

Making the pattern for the door panels
http://i1320.photobucket.com/albums/...ps61fbdd7f.jpg

Mocking up the kick panels
http://i1320.photobucket.com/albums/...ps78c636e0.jpg
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Mocking up the subwoofer box. Keeping the stock gas tank location and bench seat but still want nice deep bass!!
Gas tank cover, the base for the sub box
http://i1320.photobucket.com/albums/...ps2a71796c.jpg

Subwoofer box mock up going with 2 JL Audio 6w3v3 in a ported box, 6x8s rear, 6.5 componets and 4 inch center speaker for the front. All will be powered by a JL 5 channel amp.
http://i1320.photobucket.com/albums/...ps90eb86f8.jpg

Still working on mocking up the audio.Got to figure out where to put the 6x8s. Box will be covered in black suede.
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Here's my old Mercedes I built, simple and clean

http://i1320.photobucket.com/albums/...ps980d7f3f.jpg

And that's where I'm at with the truck now. Hopefully it will be done by the end of this month. Fingers crossed
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Looked like a pretty nice BBW truck to start with. You are making a lot of progress in a short time, Keep the pics coming.

Re: 56 Mild Custom Build
 

Looks like a nice build. Do keep the pics coming.
What kit did you use for the one piece windows?
Kim

Re: 56 Mild Custom Build
 

I have to second what Kim asked. When I saw your one piece window picture, I raised an eyebrow. Hmmmm.

Re: 56 Mild Custom Build
 

All the kits are the same. They come wih the glass and the window channel felt and they just tell u to take out the wing window and install the channel felt. The problem with that is there's no metal channel for the felt to to glue to so it just hangs there loose in the front of the glass. Also where the window attaches to the regulator is to short so the window always pops out when rolled all the way down. And since the one piece window now is angled in the front ( the original window is vertical ) u have to angle the original metal channel back a few degrees and also fab up a new metal channel in the front of the door and angle it with the rear channel. There is no kit out there that works right u have to fab it up yourself. If any one lives in the Houston area I can do it for u.
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Nice start, and tremendous progress for less than a month. What part of the Houston area are you in?

Re: 56 Mild Custom Build
 

NW Houston. Truck is being built at my "shop" in Tomball
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Driver fender. Pulled and hammered out a few dings. Welded up some cracks. Fabed up a missing brace. First coat of bondo about to block it out.
http://i1320.photobucket.com/albums/...psd955f6de.jpg

My dad blocking out the fender and door
http://i1320.photobucket.com/albums/...ps01a69858.jpg
http://i1320.photobucket.com/albums/...ps5b162485.jpg


Me mocking up the AC. AC and heater lines will be routed thru the kick panel and behind the inner fender.
http://i1320.photobucket.com/albums/...pse7cc2113.jpg

Daddy's little helpers
http://i1320.photobucket.com/albums/...ps96cf1fc4.jpg

Yep I need a truck. Getting the board for the door and kick panels
http://i1320.photobucket.com/albums/...ps3d94a746.jpg

Stripping the tail gate
http://i1320.photobucket.com/albums/...ps69b987f2.jpg
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Look at all the pretty colors
http://i1320.photobucket.com/albums/...ps9901741e.jpg

Cleaning the frame getting ready to paint it found this under a pile of grease. Wtf? Why would some one do that? Maybe for a big block?
http://i1320.photobucket.com/albums/...ps1338ac43.jpg
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Looking good.
Kim

Re: 56 Mild Custom Build
 

New parts came in today
http://i1320.photobucket.com/albums/...ps84231b08.jpg

Bondo work done on passenger fender. Just sprayed it with ecthing primer. Set it aside, will do final primer and block sanding once mounted.
http://i1320.photobucket.com/albums/...psb45786d7.jpg

Installed passenger lower door hinge panel, original one was pretty mangled. Install door to double check and see if I lined it up right... Which I did :)
http://i1320.photobucket.com/albums/...ps1c5431ba.jpg
Posted via Mobile Device

Re: 56 Mild Custom Build
 

I love getting new parts.
The fender looks good.
Kim

Re: 56 Mild Custom Build
 

Thanks. There's a lot of hours in that fender.
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Lining up the door
http://i1320.photobucket.com/albums/...ps2e7ea3ec.jpg

Put the fender on so a I can weld on the lower fender brace I fabbed up
http://i1320.photobucket.com/albums/...psf8edce64.jpg
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Coming right along - looking good!

Re: 56 Mild Custom Build
 

Looks good.
The real trick is getting it all to line up back on the frame.
Kim

Re: 56 Mild Custom Build
 

Looking good

Re: 56 Mild Custom Build
 

Got the frame painted and the cab under coated. Finally the cab is in the frame so I can finish up the body work and get it in primer.

http://i1320.photobucket.com/albums/...ps8e9ef3c6.jpg
http://i1320.photobucket.com/albums/...ps65a8b2b2.jpg
http://i1320.photobucket.com/albums/...ps8effc3bb.jpg
Posted via Mobile Device

Re: 56 Mild Custom Build
 

Looking good. Great work and getting it done quickly. Youll be done in no time.
Posted via Mobile Device

Re: 56 Mild Custom Build
 

The frame came out real nice.
Kim

Re: 56 Mild Custom Build
 

Thanks. Hopefully I'll be laying some paint down pretty soon.

Thanks. I painted it with satin tractor paint very durable paint.
Posted via Mobile Device