1963 hafl ton 4x4 shocks
 

Dose anyone have a part number for the front and rear shocks for a 63 half ton 4x4? i looked up some threads and found a couple rancho numbers, rs5008 for the front and rs5116 for the rear but the were talking about a 3/4 ton. would those work on my half ton? thanks!

Re: 1963 hafl ton 4x4 shocks
 

they will work, do you have shocks on it now if you do meausure them collapsed and extended then go to your flaps and give them the meaurements and they should find a shock for you

Re: 1963 hafl ton 4x4 shocks
 

I run the 9000's on mine. If you want I can get pn's when I get home so you could cross reference them?
Posted via Mobile Device

Re: 1963 hafl ton 4x4 shocks
 

Thanks guys!

Re: 1963 hafl ton 4x4 shocks
 

When you want to option a Heavy Duty shock absorber on a C10 you can use a shock from a C20. According to the parts book, the same shock absorber, group 7.345, is used on a K10 or K20 from 63-66 GM part #3197643 for the front and part#22012166 for the rear. The rear part number is a newer number that supersedes the original.

Re: 1963 hafl ton 4x4 shocks
 

I can help you spec out a Bilstein if you can measure the resting length of the damper.