67 frame stands
 

Does any body have any pics of 4x4 small block frame stands and does anybody know where to get them.

Re: 67 frame stands
 

Are you meaning like a rotisserie kind? Something like these?

Re: 67 frame stands
 

Are you talking about engine mounts stands? Didn't think there was any difference just the position closest to the firewall to clear the engine cradle and transfer case.

Re: 67 frame stands
 

Oopps lol... Told my brother to put the frame stand pics on here while I go help my mom and he put the actual frame stand pics... :dohh: Ok gotcha, This?

Re: 67 frame stands
 

This is a later Blazer setup, just can't remember if it is an I-6 or V-8. The assembly is often available used in the classified section. There are also aftermarket replacement mounts/crossmembers too. Generally those will also have a removable center section.

Re: 67 frame stands
 

Got confused... Didn't read good enough. I'll stick to askin questions, Sorry guys.
Posted via Mobile Device

Re: 67 frame stands
 

My mounts and crossmember are identical to that but before the motor mounts sit flush the oil pan wants to hit the crossmember.

Re: 67 frame stands
 

Do you have the correct upper mounts and are they in good condition? If they sag the motor can touch, at least a 68 V6 K2500 GMC I knew did.
Do you have the correct oil pan?

Re: 67 frame stands
 

I believe there correct the same ones off the big block that was in it, but i went and got brandnews from the auto parts store. It is a oil pan they would have ran throughout 73-87 I guess is the same?

Re: 67 frame stands
 

Just like this one.

Re: 67 frame stands
 

and upper mounts like this.

Re: 67 frame stands
 

Need to do some digging and get back to this. When it comes to square body crossover I'm lost.

Re: 67 frame stands
 

I am lost right now to I have done plenty of square motor swaps but this is my first 67-72 swap do you know or have any pics of oil pans they ran with the 4x4 small blocks? Or if they even varied I have no clue.
Posted via Mobile Device