The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Patch panels for cab corners (https://67-72chevytrucks.com/vboard/showthread.php?t=571071)

BamaDave

03-17-2013 06:27 PM

Patch panels for cab corners

Here is my truck...http://67-72chevytrucks.com/vboard/s...d.php?t=403630

Now, do I need to do the patch panels, if so, best place to get them?

Is there a better easier fix for the rust?

andrewmp6

03-18-2013 07:12 AM

Re: Patch panels for cab corners

Looks like it rusted from the inside i would cut it open see how bad it is first then order what you need to fix it.As far as sheet metal a vendor on here http://store.73-87chevytrucks.com/me...tegory_Code=C1

Keith Seymore

03-18-2013 07:12 AM

Re: Patch panels for cab corners

I got mine from LMC.

If you check my build/intro thread linked below you can see the repair. Rather than welding I used the panel adhesive. Seems to be holdling up well.

K

rs74	03-18-2013 09:06 AM

Re: Patch panels for cab corners

Quote:

Originally Posted by Keith Seymore (Post 5954323)

I got mine from LMC.

If you check my build/intro thread linked below you can see the repair. Rather than welding I used the panel adhesive. Seems to be holdling up well.

K

My body man says that he glues alot of panels. He is getting ready to glue a few pieces on my bed. That is what they do on the newer vehicles from factory. As long as they are not a structural panel.

All times are GMT -4. The time now is 05:50 AM.