The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   62 K10 frame sees the light of day (https://67-72chevytrucks.com/vboard/showthread.php?t=574394)

bhc41051 04-06-2013 08:18 PM

62 K10 frame sees the light of day
 
3 Attachment(s)
I finally bought tires; I just couldn't resist pushing it outside and washing the dust off. It's getting very hard to find American made 235/75R-15's in a black wall these are Firestone AT's... So so much work to do......

RANDY COX 04-06-2013 08:49 PM

Re: 62 K10 frame sees the light of day
 
Lookin good,Lookin good...

aerotruk63 04-07-2013 05:54 AM

Re: 62 K10 frame sees the light of day
 
It`s all in the details. Looks great so far.

BLK65K10 04-07-2013 12:21 PM

Re: 62 K10 frame sees the light of day
 
Looks like your on the road to a nice truck!

61K10 04-07-2013 12:59 PM

Re: 62 K10 frame sees the light of day
 
I wish my frame was done like yours--nice job. did you rebuild your leaf spring bushings? and if so how hard was it taking them apart?

Captainfab 04-08-2013 01:25 AM

Re: 62 K10 frame sees the light of day
 
That looks great :thumbs:

Do you happen to have part numbers for the shocks you used?

bhc41051 04-08-2013 08:25 AM

Re: 62 K10 frame sees the light of day
 
Quote:

Originally Posted by 61K10 (Post 5996245)
I wish my frame was done like yours--nice job. did you rebuild your leaf spring bushings? and if so how hard was it taking them apart?

Yes I replaced pins and bushings friont and rear. I also replaced the shackles on the front. The front end rear spring mount bushings were really tough. I was afraid the rear springs would be hard but they came right apart. The shop manual says to use a slide hammer to remove the pins; but I used a brass drift and drove them inwards. I'm glad I replaced everything it really snugged up the suspension... I also replaced a couple of broken leaf springs..

bhc41051 04-08-2013 08:35 AM

Re: 62 K10 frame sees the light of day
 
Quote:

Originally Posted by Captainfab (Post 5997772)
That looks great :thumbs:

Do you happen to have part numbers for the shocks you used?

On the front I used Rancho RS5008 and the rear RS5114. I'm a little worried about the length of the rear shocks, as it sits they're almost extended to the max.. I hope after the cab and bed areinstalled Things will work out. I'm not planning on any off roading..

padresag 04-08-2013 10:49 AM

Re: 62 K10 frame sees the light of day
 
on the rears on my 64 i used rs5601 but they do mount differently on the inside of the frame and mount off a bolt coming thru the middle of the frame. there is a chart for length and length of travel from the manuf.
ron

1963c-10 04-08-2013 11:55 AM

Re: 62 K10 frame sees the light of day
 
Off to a great start.

gofastnut 04-08-2013 12:19 PM

Re: 62 K10 frame sees the light of day
 
Looks good! Keep at it!

j.kirn 04-08-2013 07:03 PM

Re: 62 K10 frame sees the light of day
 
gonna be a good looking truck especially the color


All times are GMT -4. The time now is 01:15 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com