The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Sanderson CC11 headers (https://67-72chevytrucks.com/vboard/showthread.php?t=575314)

b1kem1ke 04-12-2013 03:17 PM

Sanderson CC11 headers
 
Has anyone got these to work? Sanderson claims they should work, but every vehicle is a little bit different. I have about a 1/4" clearance to the engine mount bracket on the driver's side, the passenger side touches on my 'test fit', will get worse after bolts are snugged (maybe 1/4" interference).

It's the 'bulge' of the bracket that's in the way. How much clearance is ideal/minimal? Does anyone know of some brand with more header clearance? Or engine mounts that sit the whole engine maybe 1/2" higher? If so, is it an 'easy swap', i.e. lift the engine slightly to replace without a removal? I'm a machinist, thinking of making my own, but don't want a time consuming project if there's an easy fix I'm overlooking.

Here's the side that is o.k., but you can see where the tube is close. That's where the problem is at on the other side.
https://sphotos-b.xx.fbcdn.net/hphot...24430156_o.jpg

nicolas72gmc 04-12-2013 03:38 PM

Re: Sanderson CC11 headers
 
The Sandersons that Early Classic Enterprises sells clears just fine. I think they are the CC10's. You can find them on their website. I'm running them with no problems.

b1kem1ke 04-12-2013 04:59 PM

Re: Sanderson CC11 headers
 
Thanks. Just looked at their site. They have their own numbering system (no CC#), but they look like the ones I have. Might have to call Sanderson...

nicolas72gmc 04-12-2013 05:31 PM

Re: Sanderson CC11 headers
 
When I called to order these, (like a year ago), I recall Mark, from ECE, telling me they were the #10 model. Hope this helps. :)

jgmc 04-12-2013 11:46 PM

Re: Sanderson CC11 headers
 
I bought the Sanderson headers a few years back from Early Classic and they didn't work for me either. I ended up with Stan's Headers made right in the beautiful state of Washington.

Z10 04-12-2013 11:53 PM

Re: Sanderson CC11 headers
 
Soon to find out if the CC11 fit my 72. These were recommended by another forum member who is using them.
http://i20.photobucket.com/albums/b2...IMG_0256-1.jpg

Gmcfolife 04-13-2013 12:24 PM

Re: Sanderson CC11 headers
 
1 Attachment(s)
I have the ECE headers which are the cc10's I have at least 3/4" clearance on each side.
Posted via Mobile Device

Gmcfolife 04-13-2013 12:25 PM

Re: Sanderson CC11 headers
 
1 Attachment(s)
Posted via Mobile Device

rogergodding 04-13-2013 06:28 PM

Re: Sanderson CC11 headers
 
I have them with no problems, supposed to be cc-10

elf w/capital T 04-13-2013 08:27 PM

Re: Sanderson CC11 headers
 
Wow, those are slick!!!!

gonnuts 04-13-2013 08:52 PM

Re: Sanderson CC11 headers
 
Quote:

Originally Posted by rogergodding (Post 6009444)
I have them with no problems, supposed to be cc-10

Ditto.
Posted via Mobile Device
Posted via Mobile Device

Z10 04-13-2013 09:13 PM

Re: Sanderson CC11 headers
 
If I'm not mistaken the CC11 are for "D" port heads. That may be the only difference between them and the CC10?

:gmc2:

nicolas72gmc 04-13-2013 09:35 PM

Re: Sanderson CC11 headers
 
Quote:

Originally Posted by Z10 (Post 6009776)
If I'm not mistaken the CC11 are for "D" port heads. That may be the only difference between them and the CC10?

:gmc2:

And angled plugs.
Posted via Mobile Device

nicolas72gmc 04-13-2013 09:44 PM

Re: Sanderson CC11 headers
 
1 Attachment(s)
Posted via Mobile Device

nicolas72gmc 04-13-2013 09:46 PM

Re: Sanderson CC11 headers
 
1 Attachment(s)
Mine clear no problems
Posted via Mobile Device


All times are GMT -4. The time now is 11:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com