The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Gas Tank Strap Rivets (https://67-72chevytrucks.com/vboard/showthread.php?t=580231)

LynnJr

05-14-2013 06:19 PM

Gas Tank Strap Rivets

My tank and straps showed up today without the 6 rivets needed for the brackets.

I am guessing pop rivets are out of the question and steel is the way to go?
What size and material are you guys using and how are you installing them?

I don't want to run down to the hardware store and beat them flat with a hammer only to discover I need to do it a second time.

Is welding them on an option?

notallthere

05-14-2013 06:33 PM

Re: Gas Tank Strap Rivets

I just used bolts and nylock nuts for them. I took them to the hardware store and found ones that fit snug in the holes. That was 10 years ago so I do not remember what size I bought.

pontgta

05-14-2013 07:19 PM

Re: Gas Tank Strap Rivets

Quote:

Originally Posted by notallthere (Post 6071171)

I just used bolts and nylock nuts for them. I took them to the hardware store and found ones that fit snug in the holes. That was 10 years ago so I do not remember what size I bought.

THat is it. I used 7/16 stainless with the nylock as well. I think bolts they were 1" in length

All times are GMT -4. The time now is 06:01 AM.