I need some aftermarket dually fenders.
 

Does anyone know where I can pickup a set of fenders like these but that will fit my K30 instead of a semi. The only ones that I can find are for a semi. I have to get some to make the truck "legal" until I get the flat bed put on. Not sure if there are any made for a truck. If so then where?

Re: I need some aftermarket dually fenders.
 

What about the 1/4 fenders they use on semis? Some where plastic or fiberglass so it would be easy to trim them down to fit your truck,all you would need is the mounting hardware.Maybe a truck/ trailer shop might be able to help,or a semi wrecking yard.
Posted via Mobile Device

Re: I need some aftermarket dually fenders.
 

Maybe use two trailer fenders welded together to give you the width you need?

Re: I need some aftermarket dually fenders.
 

I've seen them on F450 car haulers in my area, there are a few car transport services that take a cab-chassis truck, and bolt a gooseneck hitch directly to the frame, and put on a pair of fenders.

Maybe talk to an up-fitter in your area? My google searches didn't turn anything up, but I know they exist.

Re: I need some aftermarket dually fenders.
 

A very similar thread in another forum I am registered on was recently discussed. HERE

Re: I need some aftermarket dually fenders.
 

Just mud flaps are legal on bobtail big trucks.

But these are for 16" tires

http://www.awdirect.com/quarter-fend...body-hardware/
Posted via Mobile Device

Re: I need some aftermarket dually fenders.
 

Here for these trucks it is at least some sort of fender cover. They said they don't care what it is, plywood or anything as long as it has something covering it until I get a bed. If I can find a nice set of aluminum or stainless ones I might just keep them on after I put the flat bed on depending how it looks. That way it would keep the mud and what not off the under side of the bed. I would have to see what it looked like first though.

Re: I need some aftermarket dually fenders.
 

look at wrecker / tow truck supplier's , our rollback has a similar fender on 19.5 wheel's. they would fit good over a 16" wheel.

Re: I need some aftermarket dually fenders.
 

That's a good thought. I am going to check with our local wrecker company to see if they have any or where they get their stuff from.