I need some aftermarket dually fenders. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rs74** · 06-04-2013, 11:53 AM

Does anyone know where I can pickup a set of fenders like these but that will fit my K30 instead of a semi. The only ones that I can find are for a semi. I have to get some to make the truck "legal" until I get the flat bed put on. Not sure if there are any made for a truck. If so then where?

Rubble · 06-04-2013, 03:03 PM

What about the 1/4 fenders they use on semis? Some where plastic or fiberglass so it would be easy to trim them down to fit your truck,all you would need is the mounting hardware.Maybe a truck/ trailer shop might be able to help,or a semi wrecking yard.
Posted via Mobile Device

andrewmp6 · 06-05-2013, 02:17 AM

Maybe use two trailer fenders welded together to give you the width you need?

MalibuSSwagon · 06-05-2013, 10:22 AM

I've seen them on F450 car haulers in my area, there are a few car transport services that take a cab-chassis truck, and bolt a gooseneck hitch directly to the frame, and put on a pair of fenders.

Maybe talk to an up-fitter in your area? My google searches didn't turn anything up, but I know they exist.

83GMCK2500 · 06-05-2013, 10:49 AM

A very similar thread in another forum I am registered on was recently discussed. HERE

KQQL IT · 06-05-2013, 11:49 AM

Just mud flaps are legal on bobtail big trucks.

But these are for 16" tires

http://www.awdirect.com/quarter-fend...body-hardware/
Posted via Mobile Device

**rs74** · 06-05-2013, 09:28 PM

Quote:

Originally Posted by KQQL IT

Just mud flaps are legal on bobtail big trucks.

But these are for 16" tires

http://www.awdirect.com/quarter-fend...body-hardware/
Posted via Mobile Device

Here for these trucks it is at least some sort of fender cover. They said they don't care what it is, plywood or anything as long as it has something covering it until I get a bed. If I can find a nice set of aluminum or stainless ones I might just keep them on after I put the flat bed on depending how it looks. That way it would keep the mud and what not off the under side of the bed. I would have to see what it looked like first though.

jitteryguy · 06-05-2013, 09:34 PM

look at wrecker / tow truck supplier's , our rollback has a similar fender on 19.5 wheel's. they would fit good over a 16" wheel.

**rs74** · 06-05-2013, 09:37 PM

That's a good thought. I am going to check with our local wrecker company to see if they have any or where they get their stuff from.

06-04-2013, 11:53 AM	#1
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	I need some aftermarket dually fenders. Does anyone know where I can pickup a set of fenders like these but that will fit my K30 instead of a semi. The only ones that I can find are for a semi. I have to get some to make the truck "legal" until I get the flat bed put on. Not sure if there are any made for a truck. If so then where? Attached Images __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

06-04-2013, 03:03 PM	#2
Rubble Registered User Join Date: Feb 2012 Location: Big Valley. Alberta Posts: 674	Re: I need some aftermarket dually fenders. What about the 1/4 fenders they use on semis? Some where plastic or fiberglass so it would be easy to trim them down to fit your truck,all you would need is the mounting hardware.Maybe a truck/ trailer shop might be able to help,or a semi wrecking yard. Posted via Mobile Device __________________ 1977 Chev C30 454/465/14ff DRW 1974 Chev C20.350/465/14ff " Rock n Roll ain't noise pollution"

06-05-2013, 02:17 AM	#3
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: I need some aftermarket dually fenders. Maybe use two trailer fenders welded together to give you the width you need?

06-05-2013, 10:22 AM	#4
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,591	Re: I need some aftermarket dually fenders. I've seen them on F450 car haulers in my area, there are a few car transport services that take a cab-chassis truck, and bolt a gooseneck hitch directly to the frame, and put on a pair of fenders. Maybe talk to an up-fitter in your area? My google searches didn't turn anything up, but I know they exist. __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi

06-05-2013, 10:49 AM	#5
83GMCK2500 Registered User Join Date: Sep 2009 Location: Beaverton, OR from WA State Posts: 1,515	Re: I need some aftermarket dually fenders. A very similar thread in another forum I am registered on was recently discussed. HERE __________________ Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96

06-05-2013, 11:49 AM	#6
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,192	Re: I need some aftermarket dually fenders. Just mud flaps are legal on bobtail big trucks. But these are for 16" tires http://www.awdirect.com/quarter-fend...body-hardware/ Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

06-05-2013, 09:34 PM	#8
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: I need some aftermarket dually fenders. look at wrecker / tow truck supplier's , our rollback has a similar fender on 19.5 wheel's. they would fit good over a 16" wheel. __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

06-05-2013, 09:37 PM	#9
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: I need some aftermarket dually fenders. That's a good thought. I am going to check with our local wrecker company to see if they have any or where they get their stuff from. __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.