The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - CPP 2/4 drop kit now nose high (https://67-72chevytrucks.com/vboard/showthread.php?t=583558)

Procurement_man

06-07-2013 04:46 PM

CPP 2/4 drop kit now nose high

The PO torched my springs so I got a deluxe 2/4 drop kit from CPP. Finished the install and the front is higher than the back by about 1 inch. Truck has a I 6 in it now... will a Small block bring it down to even? I plan on an engine swap soon. Can I combine the 2 inch drop springs with drop spindles? If I do that will the front then be too low and look funny? I like where the back is now.

tinydb84

06-07-2013 05:00 PM

Re: CPP 2/4 drop kit now nose high

The small block might bring it down a hair. Drive it around for a bit and see if the springs settle before doing anything.

You can add drop spindles and be a 4/4 drop (which I would do)

All times are GMT -4. The time now is 08:16 AM.