coil compressor
 

Just curious, when I finally get to the point of dropping my truck. Do I need to get a coil compressor to remove and install the new coils?

Re: coil compressor
 

Nope drop lower control arm down install spring and jack control arm up and install lower ball joint nut

Re: coil compressor
 

What about the rears though?

Re: coil compressor
 

Jack the rear frame and put them on jacksatnds and start unbolting the spring cups, if the coils have cups with nuts welded on them your most likely going to snap them off which is no biggie, just a speed bump.
Posted via Mobile Device

Re: coil compressor
 

Ok thanks guys.

Re: coil compressor
 

Don't just let the lower A-Arm drop when you break loose the balljoints as this can be dangerous. I put a floorjack about an inch below the arm so it can't drop too far and then lower it down slowly once the balljoint is free as it will still be under alot of pressure.