The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Need To Remove The Dash From My Truck! (https://67-72chevytrucks.com/vboard/showthread.php?t=589815)

88fordf150

07-23-2013 05:28 PM

Need To Remove The Dash From My Truck!

I need to remove my dash from my 69 to do a repair on the cowl area. Whats the best way to separate the dash from the lower window frame? It looks like it is spot welded together.

mmiddle

07-23-2013 05:40 PM

Re: Need To Remove The Dash From My Truck!

you can ether buy a spot weld cutter and cut these spot welds out or cut the dash where the dash pad is. It all depends on you.

68gmsee

07-23-2013 08:56 PM

Re: Need To Remove The Dash From My Truck!

I think that cutting along the area below the dashpad and rewelding would be a better way. There are lots of spot welds there on the front. I'd be reluctant to cut them out for fear of introducing more openings for rust to set in after rewelding.

mmiddle

07-23-2013 09:06 PM

Re: Need To Remove The Dash From My Truck!

I do agree, if the top dash board does not need to move then just cut at the dotted line and reweld.

88fordf150

07-24-2013 05:03 AM

Re: Need To Remove The Dash From My Truck!

I agree, thanks for the idea!

All times are GMT -4. The time now is 03:37 PM.