The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Anyone get a radiator from.... (https://67-72chevytrucks.com/vboard/showthread.php?t=591884)

In The Ten Ring 08-08-2013 08:52 PM

Anyone get a radiator from....
 
Classic Chevy Parts or Tucker's?

Advance Auto and NAPA no longer carry radiators for our vintage of truck.....so....anyone get one from the two vendor's above?

I am pretty sure I have a 1 row (250 3 speed, no ac) and if I step up to a 3 row, I don't mind getting new brackets but I'd hate to have to modify the radiator core support.

THANKS.

Andy4639 08-08-2013 09:05 PM

Re: Anyone get a radiator from....
 
Sorry can't say for the vendor's u asked about.
Here is a link from O Reilly's. I bought my last one from them.


http://www.oreillyauto.com/site/c/se...RWD&vi=1029866

In The Ten Ring 08-08-2013 09:27 PM

Re: Anyone get a radiator from....
 
Wow man,

Thanks! Will save me about 20 bucks and might save me more as it states "qualifies for free shipping" but there are no such stores where I am in WV (to my knowledge).

Now the website lists the radiator on the left as "fitting a 1972 truck" like mine but it's a 4 row.....will I have to modify my core support to get that to fit?

cdowns 08-08-2013 10:18 PM

Re: Anyone get a radiator from....
 
NAPA still carries radiators for chevybtrucks 67-72 i just looked one up and could have it in the store for me to pickup sat

MARKDTN 08-09-2013 07:38 AM

Re: Anyone get a radiator from....
 
Quote:

Originally Posted by cdowns (Post 6211767)
NAPA still carries radiators for chevybtrucks 67-72 i just looked one up and could have it in the store for me to pickup sat

I agree-I would be shocked if the parts stores stopped carrying these radiators. The basic core is used through the '70s in a whole lot of GM cars and trucks. Get a better counter guy at your local store.

PanelDeland 08-09-2013 08:43 AM

Re: Anyone get a radiator from....
 
I got a 4 row from O'Rielly's also.I don't recall seeing any but a 4 row but that's what I was looking for.If you go to 4 row it's just a few minutes and a pair of channel locks or vise grips and a drill to swap the mounts.I'm planning on A/C down the road so I wanted the 4 row to step up the cooling for when that happens.

bigmac73 08-09-2013 09:18 AM

Re: Anyone get a radiator from....
 
I got mine from LMCtrucks, upgraded to a 4 row, good quality and no issues for the last 3 years.
Mike

LockDoc 08-09-2013 09:25 AM

Re: Anyone get a radiator from....
 
-
You need new 4 core support brackets & pads for the top & bottom. Any of the vendors should have them. They are just slightly longer than the 2/3 core brackets. You will also most likely have to modify your radiator support as well. No big deal, you just bend down the lip on the support so the longer 4-core bottom brackets can bolt down flush to the support. You could probably use your current brackets but the radiator wouldn't sit down where it should. I would install the 4 core brackets myself.

LockDoc

eagleuh1 08-09-2013 09:30 AM

Re: Anyone get a radiator from....
 
I bought a 4 core at AutoZone for my 68C20. Spectra premium brand. very reasonable price and fit perfect. Good luck. Jim

midniteblues 08-09-2013 10:02 AM

Re: Anyone get a radiator from....
 
i got a decent 4 core from advance 3 mo. ago. there web site and online people would only show me a aluminum rad that was around 6 bills that was for a 67-72.
searching the web site myself i found one that was the right size and looked correct.
so i asked about it. an the guy said "that dont fit your truck".
well I thought differnt.
turns out my local store had one in stock.
paid for it online useing a promo code.went too check it out an picked it up.
fit perfect,looked good(ecxept it has one extra bung below the rad cap on the tank)and it has those straps around the core.that dont bother me.
but i must say that its not as heavy duty as a harrison.
but for $215.00 i hope i dont get burned by yet another low quality part.

so advance does have them but you gotta search it out.
i can find the part # for ya if you want it.

slow-1 08-09-2013 10:09 AM

Re: Anyone get a radiator from....
 
Read my recent experience on trying to buy a radiator.

http://67-72chevytrucks.com/vboard/s...d.php?t=589961

slow-1 08-09-2013 10:11 AM

Re: Anyone get a radiator from....
 
Here is a thread with the part number for Advance Auto.

http://67-72chevytrucks.com/vboard/s...d.php?t=589010

SparkyRnD 08-09-2013 11:10 AM

Re: Anyone get a radiator from....
 
we also make a bolt-in aluminum crossflow if you are looking for an upgrade, and we're a sponsor here:
http://67-72chevytrucks.com/vboard/s...d.php?t=590670

FirstOwner69 08-09-2013 12:33 PM

Re: Anyone get a radiator from....
 
Rock Auto sells several different radiators. They may all be 4 row.
One is Spectra Premium, which I seem to recall reading positive comments about on this forum.

MARKDTN 08-09-2013 12:48 PM

Re: Anyone get a radiator from....
 
Quote:

Originally Posted by midniteblues (Post 6212248)
...looked good(ecxept it has one extra bung below the rad cap on the tank)...

The extra bung is to send the return hose back to instead of on top of the water pump. This makes the heater work faster. Used on the 73-87 trucks and vans.

flashed 08-09-2013 12:53 PM

Re: Anyone get a radiator from....
 
I bought a new one for my truck a couple of years a go at O'reiley's in stock even and after I installed it compared the old one to my 68 Chevelle one still new in the box and they are the same .Its a shame youre so far away as I still have that new in the box one as I sold the Chevelle and kept the radiator .

In The Ten Ring 08-09-2013 01:20 PM

Re: Anyone get a radiator from....
 
Thanks guys....have to keep after it I suppose.

For the last poster.....if you want to sell a radiator, or "donate" it, I will pay shipping.

hfd410 08-09-2013 03:34 PM

Re: Anyone get a radiator from....
 
I got a 4 row from autozone. It was way cheaper having it delivered to the house than picked up at the store. They have free shipping on anything over $99 and they did 20% off fathers day weekend for online orders....It is a Spectre brand. Brass tanks, nice radiator and fit perfect.

In The Ten Ring 08-10-2013 10:13 AM

Re: Anyone get a radiator from....
 
Well, this one seems to be in stock only a few miles away! I guess I'll try and grab it today.

It's a 3 row...will that fit right into a 1 row bracket? I think my 1972 250 3 speed manual, no AC has a 1 row.

What say you guys? 1 row now you think? It's all stock.

LockDoc 08-10-2013 11:57 AM

Re: Anyone get a radiator from....
 
Quote:

Originally Posted by In The Ten Ring (Post 6213741)
Well, this one seems to be in stock only a few miles away! I guess I'll try and grab it today.

It's a 3 row...will that fit right into a 1 row bracket? I think my 1972 250 3 speed manual, no AC has a 1 row.

What say you guys? 1 row now you think? It's all stock.


I don't think they made a 1 row, it would be a 2 row. I think the 2 row and 3 row use the same brackets.

LockDoc

HotRod C/10 08-10-2013 01:22 PM

Re: Anyone get a radiator from....
 
I got a brass Northern brand from my local radiator shop (4 row)

In The Ten Ring 08-10-2013 05:44 PM

Re: Anyone get a radiator from....
 
Well I picked up the radiator. Is it a good time to go ahead and get a water pump and thermostat like the box suggests?

Lattimer 08-10-2013 05:59 PM

Re: Anyone get a radiator from....
 
Quote:

Originally Posted by In The Ten Ring (Post 6214297)
Well I picked up the radiator. Is it a good time to go ahead and get a water pump and thermostat like the box suggests?


I would, and all the hoses if you haven't replaced them recently.

In The Ten Ring 08-10-2013 06:11 PM

Re: Anyone get a radiator from....
 
I'd bet all those hoses, belts, and everything else is at least as old as 1991!

Once again, is Advance Auto/NAPA good for these parts?

Lattimer 08-10-2013 07:07 PM

Re: Anyone get a radiator from....
 
Quote:

Originally Posted by In The Ten Ring (Post 6214329)
I'd bet all those hoses, belts, and everything else is at least as old as 1991!

Once again, is Advance Auto/NAPA good for these parts?

Should be. I got my hoses at Advance.


All times are GMT -4. The time now is 07:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com