The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   No back up lights.... (https://67-72chevytrucks.com/vboard/showthread.php?t=59240)

72gmcshorty 07-04-2003 03:26 AM

No back up lights....
 
What cause no reverse lights to come on? My lights work when I press the brake pedal.

Gee_Emm 07-04-2003 09:01 AM

Sounds like grounding gremlins. Run a ground wire from a bare metal spot on the frame and touch it on the lense screw.

jay6891 07-04-2003 09:28 AM

Might check wire and switch on top of column and see if you are getting power. Block your tires, turn on ignition,(not running),put into reverse and see if you got juice to lights.

71GMC_3/4T 07-04-2003 10:02 AM

Have someone stand behind the truck while you run the gear selector from park to neutral. If the lights blink on, the switch needs adjustment.
If you look at the switch, there will be four wires attached to it with two different plugs. The purple wires are for the neutral safety start. The other two wires are for the backup lights. Pull that connector off and short across the plug with a piece of wire with the key on. If the lights work, you have a bad or misadjusted switch.
Let us know what you find.
:gmc:

Longhorn Man 07-04-2003 12:23 PM

All 3 of mine had kerfaggled switches on the column.

71GMC_3/4T 07-04-2003 07:56 PM

Glad mine isn't kerfaggled! I imagine that's pretty bad, eh?
Mine is slightly defuggered. It just needs a little adjustment, for the last 3 years... :)
I didn't think they even worked until one night I was backing up and didn't quite get in reverse. I was looking around trying to figure out who turned on the porch light when I finally realized my reverse lights were actually on! Now, if they would work when the truck is actually in reverse... I know, adjus tit! Some day I will dern it!

Boardrider52 07-04-2003 08:47 PM

i'v got that same problem

Gee_Emm 07-04-2003 11:17 PM

I got the same problem too, I just wiggle the shifter if I want the lights to come on.

68Custom 07-05-2003 04:27 AM

Anyone out there NOT have this problem? I know its got my lights as well, oh well :p

Aaron:bowtie:

PanelDeland 07-05-2003 11:19 AM

Since I have a panel there is no veiw out the sides and limited visibility out the back.I adjusted mine and while I was at it I added a back up alarm from a forklift.I feel safer backing up and it sure attracts attention.That makes it much more likely a small child won't wonder behind the truck while I'm backing up.Also makes it easier for other drivers to know they can have the spot I'm vacating if they will give me space to back out.


All times are GMT -4. The time now is 04:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com