The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - tilt column (https://67-72chevytrucks.com/vboard/showthread.php?t=594884)

Mr Chevorlet

08-31-2013 02:41 AM

tilt column

Is the 1967 standard column turn signal harness wiring the same as a 1972 tilt column. The reason I ask is when I pulled the 67 column the wiring harness on the column had a straight adapter to the horse shoe one under the dash. And the tilt column I put in did not need the adapter to fit the horse shoe plug under the dash. Did I explain the right.
Thanks.

Mr Chevorlet

08-31-2013 04:40 PM

Re: tilt column

I have looked for other threds but maybe I am not looking in the right places. Any help or anwsers I thank you. In the mean time I will keep searching .

sprint_9

08-31-2013 05:11 PM

Re: tilt column

Someone might have put a later model turn signal switch in your truck at some point.

The later model switches had the flat connector, earlier models had the half moon. Either will work if you have the correct adapter.

Does this help?

Andy4639

08-31-2013 05:28 PM

Re: tilt column

U should be fine. The half circle is the correct one for our trucks. The flat one was for later years but with the adapter they work fine. U are ahead of the game if the tilt has the 1/2 round already.

Mr Chevorlet

08-31-2013 10:30 PM

Re: tilt column

Ok thanks guys. If I have a issue with turn signals it must be a ground problem.

Andy4639

09-01-2013 12:17 PM

Re: tilt column

Quote:

Originally Posted by Mr Chevorlet (Post 6247716)

Ok thanks guys. If I have a issue with turn signals it must be a ground problem.

More than likely yes a ground issue!;):chevy:

All times are GMT -4. The time now is 03:12 AM.