drop shocks
 

Searched with no luck.
Need a part # for shorter shocks for a 3" drop coil.
Thanks in advance
Posted via Mobile Device

Re: drop shocks
 

I've had the same difficulty on other vehicles. Usually its some kind of special shock or a shock off of a much lower vehicle, that will work for lowering the one you're working on. Then there's the valving...

Re: drop shocks
 

Relocating the upper mounts higher means using off the shelf parts designed (& valved) for your C10 app.

Re: drop shocks
 

Haven't run drop shocks on mine yet and I'm doing fine
Posted via Mobile Device

Re: drop shocks
 

The shocks are bottomed out.
bro n laws 1 ton to 1/2 ton swap and drop.

Was looking for some shorter one.

Guess of time to research Monroe catalog.
Thanks
Posted via Mobile Device

Re: drop shocks
 

I used shocks fitting a 1950 Chrysler on the front of my C-10. But, I'm running drop spindles and bags, your needs may vary.

I think CPP makes a bracket to raise your upper shock mount.

Re: drop shocks
 

Re: drop shocks
 

http://farm8.staticflickr.com/7300/9...343cf175_o.jpg


4X4 brackets on my 73 haven't had any luck finding a set at the pic n pull.
Posted via Mobile Device

Re: drop shocks
 

Those are off of the quad shock 4x4 trucks
Posted via Mobile Device

Re: drop shocks
 

Yep.
No luck finding a set.
Posted via Mobile Device

Re: drop shocks
 

Have some on my k5. But I'm going to used them haha. Doesn't Nate (porterbuilt) make them?
Posted via Mobile Device

Re: drop shocks
 

There's alot of the airbag guys that sell em.(like AVS or Porterbuilt) When I had a 4.5/7 static drop I never needed a "different" shock. Just new ones, cause they were wore out.
Posted via Mobile Device

Re: drop shocks
 

the stock length shock should get you well into the steel bump stop/spindle stop under the rubber bump stop. are you sure its not just hitting teh bump stops?

Re: drop shocks
 

They're gone altogether.
Posted via Mobile Device