WTB-backing plates
 

i need a set of backing plates for 2 3/4" brake shoes, any thing out there....

Re: WTB-backing plates
 

I have a couple rears out,any year or model I should look for?

Re: WTB-backing plates
 

I have a pair if neo doesn't, already off $75 + shipping
Thanks,
Tom

Re: WTB-backing plates
 

ttt for Tom, his Az parts are clean. Know that from experience

Re: WTB-backing plates
 

Thanks for your time, but i think ill go with Tom

Tom, do you know if the related parts are the same as the 2" shoes, and what rearend are these backing plates off of?

Got pics?, prefer, plates that are not all heavily rusted.....i can sandblast, if it is a light rust

Re: WTB-backing plates
 

PM sent. Nate

Re: WTB-backing plates
 

ttt for tom's responce

Re: WTB-backing plates
 

These came from a 77 blazer, not sure about all the other hardware being the same as the 2", I don't remember if all the hardware is there or not, if it is I'll include it.
They are not heavily rusted, I'll get you some pics if you want to see them on monday.
Thanks,
Tom

Re: WTB-backing plates
 

Tom, that would be great if you can get some pics, do you know what rearend this came from....or a pic of the center section

Could you measure the distance between the mounting bolt flange holes

Re: WTB-backing plates
 

heres some pics, these are from a 76 blazer with a 12 bolt. They are in great shape & all hardware is still attached.

Re: WTB-backing plates
 

Just an FYI on that question.

The only difference between the 2 inch and 2 3/4 inch hardware is the hold down spring pin. That is the one that slides through the small hole in the backing plate. There is one for the front and one for the rear.

Most hardware kits that I remember have both pins included and the 2 3/4 will be a little longer.

Hope this helps.

Re: WTB-backing plates
 

Tom, looks good to me. Paypal as gift or PMO? Could you measure the lenght of the mounting bolt holes....could you get a shipping quote. Zip is 19454

Thanks t bone that helps a lot

Re: WTB-backing plates
 

Looks like $24 shipping fed ex, too big for a usps flat rate box.
The flange mount holes are 3 3/8" center to center & 2 5/8"
Paypal is OK
Thanks,
Tom

Re: WTB-backing plates
 

Great! I ll check the demensions tomorrow morning, but they should fit as i have a twelve bolt. Can you pm me your paypal addy, i dont think i still have it.....

Re: WTB-backing plates
 

Tom, thank you.....paypal just sent off, let me know when you ship

Re: WTB-backing plates
 

Recieved parts today, as described and well packaged.....another satified customer, thanks tom. Good seller