PA WTB-backing plates - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 09-14-2013, 10:19 AM

i need a set of backing plates for 2 3/4" brake shoes, any thing out there....

neo1370 · 09-14-2013, 01:18 PM

I have a couple rears out,any year or model I should look for?

**t korinek** · 09-14-2013, 01:28 PM

I have a pair if neo doesn't, already off $75 + shipping
Thanks,
Tom

neo1370 · 09-14-2013, 05:53 PM

ttt for Tom, his Az parts are clean. Know that from experience

**jaros44sr** · 09-14-2013, 05:57 PM

Quote:

Originally Posted by neo1370

I have a couple rears out,any year or model I should look for?

Thanks for your time, but i think ill go with Tom

Quote:

Originally Posted by t korinek

I have a pair if neo doesn't, already off $75 + shipping
Thanks,
Tom

Tom, do you know if the related parts are the same as the 2" shoes, and what rearend are these backing plates off of?

Got pics?, prefer, plates that are not all heavily rusted.....i can sandblast, if it is a light rust

nds1968 · 09-14-2013, 06:16 PM

PM sent. Nate

neo1370 · 09-15-2013, 01:06 PM

ttt for tom's responce

**t korinek** · 09-15-2013, 07:29 PM

These came from a 77 blazer, not sure about all the other hardware being the same as the 2", I don't remember if all the hardware is there or not, if it is I'll include it.
They are not heavily rusted, I'll get you some pics if you want to see them on monday.
Thanks,
Tom

**jaros44sr** · 09-16-2013, 06:44 AM

Quote:

Originally Posted by t korinek

These came from a 77 blazer, not sure about all the other hardware being the same as the 2", I don't remember if all the hardware is there or not, if it is I'll include it.
They are not heavily rusted, I'll get you some pics if you want to see them on monday.
Thanks,
Tom

Tom, that would be great if you can get some pics, do you know what rearend this came from....or a pic of the center section

Could you measure the distance between the mounting bolt flange holes

**t korinek** · 09-16-2013, 03:54 PM

heres some pics, these are from a 76 blazer with a 12 bolt. They are in great shape & all hardware is still attached.

**TBONE1964** · 09-16-2013, 07:16 PM

Just an FYI on that question.

The only difference between the 2 inch and 2 3/4 inch hardware is the hold down spring pin. That is the one that slides through the small hole in the backing plate. There is one for the front and one for the rear.

Most hardware kits that I remember have both pins included and the 2 3/4 will be a little longer.

Hope this helps.

**jaros44sr** · 09-16-2013, 08:40 PM

Quote:

Originally Posted by t korinek

heres some pics, these are from a 76 blazer with a 12 bolt. They are in great shape & all hardware is still attached.

Tom, looks good to me. Paypal as gift or PMO? Could you measure the lenght of the mounting bolt holes....could you get a shipping quote. Zip is 19454

Quote:

Originally Posted by TBONE1964

Just an FYI on that question.

The only difference between the 2 inch and 2 3/4 inch hardware is the hold down spring pin. That is the one that slides through the small hole in the backing plate. There is one for the front and one for the rear.

Most hardware kits that I remember have both pins included and the 2 3/4 will be a little longer.

Hope this helps.

Thanks t bone that helps a lot

**t korinek** · 09-17-2013, 07:42 PM

Looks like $24 shipping fed ex, too big for a usps flat rate box.
The flange mount holes are 3 3/8" center to center & 2 5/8"
Paypal is OK
Thanks,
Tom

**jaros44sr** · 09-17-2013, 08:47 PM

Quote:

Originally Posted by t korinek

Looks like $24 shipping fed ex, too big for a usps flat rate box.
The flange mount holes are 3 3/8" center to center & 2 5/8"
Paypal is OK
Thanks,
Tom

Great! I ll check the demensions tomorrow morning, but they should fit as i have a twelve bolt. Can you pm me your paypal addy, i dont think i still have it.....

**jaros44sr** · 09-18-2013, 11:30 AM

Tom, thank you.....paypal just sent off, let me know when you ship

**jaros44sr** · 09-24-2013, 06:27 PM

Recieved parts today, as described and well packaged.....another satified customer, thanks tom. Good seller

09-14-2013, 10:19 AM	#1
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	WTB-backing plates i need a set of backing plates for 2 3/4" brake shoes, any thing out there.... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-14-2013, 01:18 PM	#2
neo1370 Registered User Join Date: Aug 2006 Location: PA Posts: 241	Re: WTB-backing plates I have a couple rears out,any year or model I should look for?

09-14-2013, 01:28 PM	#3
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB-backing plates I have a pair if neo doesn't, already off $75 + shipping Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

09-14-2013, 05:53 PM	#4
neo1370 Registered User Join Date: Aug 2006 Location: PA Posts: 241	Re: WTB-backing plates ttt for Tom, his Az parts are clean. Know that from experience

09-14-2013, 06:16 PM	#6
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: WTB-backing plates PM sent. Nate __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

09-15-2013, 01:06 PM	#7
neo1370 Registered User Join Date: Aug 2006 Location: PA Posts: 241	Re: WTB-backing plates ttt for tom's responce

09-15-2013, 07:29 PM	#8
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB-backing plates These came from a 77 blazer, not sure about all the other hardware being the same as the 2", I don't remember if all the hardware is there or not, if it is I'll include it. They are not heavily rusted, I'll get you some pics if you want to see them on monday. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

09-16-2013, 03:54 PM	#10
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB-backing plates heres some pics, these are from a 76 blazer with a 12 bolt. They are in great shape & all hardware is still attached. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

09-16-2013, 07:16 PM	#11
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: WTB-backing plates Just an FYI on that question. The only difference between the 2 inch and 2 3/4 inch hardware is the hold down spring pin. That is the one that slides through the small hole in the backing plate. There is one for the front and one for the rear. Most hardware kits that I remember have both pins included and the 2 3/4 will be a little longer. Hope this helps. __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

09-17-2013, 07:42 PM	#13
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,193	Re: WTB-backing plates Looks like $24 shipping fed ex, too big for a usps flat rate box. The flange mount holes are 3 3/8" center to center & 2 5/8" Paypal is OK Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

09-18-2013, 11:30 AM	#15
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: WTB-backing plates Tom, thank you.....paypal just sent off, let me know when you ship __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

09-24-2013, 06:27 PM	#16
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: WTB-backing plates Recieved parts today, as described and well packaged.....another satified customer, thanks tom. Good seller __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.