The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - (Another) New Guy 66C10 Stepside (https://67-72chevytrucks.com/vboard/showthread.php?t=598641)

(Another) New Guy 66C10 Stepside

Hello All,

Long time lurker, wanted to become "legit". The forum has been VERY helpful with my ride/projects. Invaluable guidance on the following mods;

CPP Disc Brake Conversion and front end rebuild (Note; Stock 15x6.5 rims do not work with the calipers, had to go with Summit Racing Rallys).
2.5" dropped spindles w/ 1" shorter springs, 4" dropped springs in the back.
Master Cyl with Vac Boost
Brake lines (Note: The T fitting on the back axle is special, so either save your old one, or buy a new one up front).
Carb Rebuild x3 (Roc B on a 250 L6) (Note; just go ahead and get the new gas tank, redo of the old one didn't work out so well)
HEI Ignition (thanks for the tip on the resistor wire - removal thereof).

Daughter getting married in Nov at a place called "The Dairy Barn" and she wanted to use my old truck as the getaway vehicle. It's been in storage for about 8 years. I think she was just doing me a favor as she knew I've been itching to get it back on the road (and I can hide some of the $ in the wedding budget)(ha).

Thanks again. Later.

http://i7.photobucket.com/albums/y26...2/66C10-sm.jpg