1963 K50 1.5 ton 10 hole rims
 

hello looking for info on locating 6 10 hole 8 3/4 bolt pattern 6 1/4 bore wheels not split rims for 63 chevy napco k50 truck ? I think this is right not sure cant find much info on these old timers anyone got any ideas? 20 inch on now split rims thankx :chevy::chevy::chevy::chevy:

Re: 1963 K50 1.5 ton 10 hole rims
 

Here's my truck :metal: http://i264.photobucket.com/albums/i...ps1c4f1ca4.jpg

Re: 1963 K50 1.5 ton 10 hole rims
 

Re: 1963 K50 1.5 ton 10 hole rims
 

Nice truck!!!!

Re: 1963 K50 1.5 ton 10 hole rims
 

22.5 do you think they will clear I think I have found a place that sells them and you can get 10 in wide too. any thoughts???????

Re: 1963 K50 1.5 ton 10 hole rims
 

Now that's a daily driver!

Re: 1963 K50 1.5 ton 10 hole rims
 

Just love this truck. Way sharp.

Re: 1963 K50 1.5 ton 10 hole rims
 

I am looking for a set as well. I found a place that will make them, but you'll need a deep wallet. They're $335 each. Apparently, the 8-3/4 10 lug bolt pattern was used only with GM medium duties, so wheels with that bolt pattern are going to be scarce. I am also looking since I've been told the RH-5s are dangerous and scary and should be avoided.

Here is some info that might help.

Wheel part number you'll need is 28160. That's an ACCURIDE wheel part number. ACCURIDE no longer makes them, but Wheels Now, Inc does. Their part number is the same only I believe it has a "WN" prefix or something like that.

Here is a link to their website. http://www.wheelsnowinc.com/

I talked to a guy there and he said the catalog has a mistake. The 28160 part number has the following features. R22.5x6.75W 10 LUG on 8-3/4 bolt pattern. The catalog says it has a different bolt pattern, but it actually has the 8-3/4.

Maybe you can find a used set of ACCURIDE wheels out there. There is a C60 in my area that has a full set of the single piece 22.5's but I'm certain the owner would not sell just the wheels to me. I will stop in this week and ask anyway. You never know.

Totally awesome truck BTW.

Not sure if this helps or not.

Re: 1963 K50 1.5 ton 10 hole rims
 

great help thanks nice truck you got too...Pale

Re: 1963 K50 1.5 ton 10 hole rims
 

You should make your way over to Stovebolt.com

There's a lot of big trucks and parts over there.

Good luck,

Wil

Re: 1963 K50 1.5 ton 10 hole rims
 

Wouldn't a 19.5 10 hole wheel work or is the circle too small on them?

Re: 1963 K50 1.5 ton 10 hole rims
 

thanks great site

Re: 1963 K50 1.5 ton 10 hole rims
 

not sure Im still trying to put it all together being a 4x4 its a little different I think?? anyway keep me posted Im going custom if have to the electric company truck was moved so I could not get photos it was just what I was lookin for looked like 10 hole 20-22.5s x 10-12 and maybe 44s-46S not sure thanks.

Re: 1963 K50 1.5 ton 10 hole rims
 

Tt should work if it clears the brake drum but there are no tires available that are taller than 34". That truck would not look correct with that small of a tire.

Re: 1963 K50 1.5 ton 10 hole rims
 

Thats a good point. Man I dig this truck.

Re: 1963 K50 1.5 ton 10 hole rims
 

Accuride catalog

Re: 1963 K50 1.5 ton 10 hole rims
 

Ill look st a couple gm trucks here at the yard for you. Have you looked into shipping these things?

Re: 1963 K50 1.5 ton 10 hole rims
 

This is the period 22.5" 1 piece wheel to look out for.