The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - C10 C-notch finished process (https://67-72chevytrucks.com/vboard/showthread.php?t=602159)

Chrisxeasy

10-28-2013 11:04 PM

C10 C-notch finished process

1 Attachment(s)

Here is my process for my 75 c10 c notch process also has a axle flip kit and 2" lowering shackles

Chrisxeasy

10-28-2013 11:05 PM

Re: C10 C-notch process

1 Attachment(s)

Photo two, bracket cut out

Chrisxeasy

10-28-2013 11:07 PM

Re: C10 C-notch process

1 Attachment(s)

Test fitting and drilling bolt holes

Chrisxeasy

10-28-2013 11:08 PM

Re: C10 C-notch process

1 Attachment(s)

Install bolts and washers and tighten

Chrisxeasy

10-28-2013 11:09 PM

Re: C10 C-notch process

1 Attachment(s)

C notch finished and 2" drop shackles installed

Chrisxeasy

10-28-2013 11:11 PM

Re: C10 C-notch process

1 Attachment(s)

Inside view of finished bolt on mcgauheys c-notch

mongoose

10-29-2013 12:02 AM

Re: C10 C-notch finished process

looks good on the notch... but what's your pinion angle set at? looks a bit steep...

JP238

06-08-2014 11:31 AM

Re: C10 C-notch finished process

I noticed you only have to leafs on your springs. What is the ride quality like? And do you have plenty of travel with the notch?

blazer2007

06-09-2014 09:23 AM

Re: C10 C-notch finished process

are hangers on backwards ?

aggie91

06-09-2014 11:52 AM

Re: C10 C-notch finished process

I'd flip the shakles around...

All times are GMT -4. The time now is 06:10 AM.