Cab and bed sections for sale
 

I'll try to cut some sections if anyone needs any, I have these bed pieces cut off already.
each rear section is $80 shipped. Bed floor has alot of surface rust, all underneath cab is rusted, wheel wells are rusted
ask if you need any other pieces cut off this before I haul it to scrap
roof section is sold
Thanks Randy

Re: Cab and bed sections for sale
 

mo

Re: Cab and bed sections for sale
 

Driver side rear bed section for 40.00, shipping to 30530.

Re: Cab and bed sections for sale
 

It had some rust on inside, I'll get pics of it tomorrow how I had to cut it. Thanks Randy

Re: Cab and bed sections for sale
 

Randy,
I'll take the ps bed tail section. What's the cost if David would pick it up for me when he gets your bed and cab?
Mike

Re: Cab and bed sections for sale
 

Undone, here are pics, let me know if you still want shipping quote

Re: Cab and bed sections for sale
 

Mike, how about $100 and this on our trade

Re: Cab and bed sections for sale
 

Yes, please. 30530

Re: Cab and bed sections for sale
 

passenger bedside to 33578? Could use a bit more than you cut out...

Re: Cab and bed sections for sale
 

Randy,
I answered this off my phone but it didn't go through.
I'll take it and towards our trade.
Mike

Re: Cab and bed sections for sale
 

UNdone, I'll get quote today

jjzepplin, sorry its sold to cash3481

Mike, sound good

Thanks Randy

Re: Cab and bed sections for sale
 

10-4 keep me in mind.

Re: Cab and bed sections for sale
 

Randy, how solid is the low hump area? I know you said under the cab was rusted but not sure about the underside of the hump. I just need a small section to patch a "custom" floor shifter installation. I cut a piece but I didn't take into consideration all of the drill holes around the cutout area. First pic is to give you a good idea of the area, second pic is about the size of the patch I would need (of course my picture angle sucks - so obviously it needs to be more square and not at the crazy angle I cropped to). What do you need for that? shipping to business address 73527

Re: Cab and bed sections for sale
 

Russ I cut this whole center section out of the cab to sell I have another partial cab at work I could cut that section out for you probably be able to ship it for $25

Re: Cab and bed sections for sale
 

I can do that Randy. I still have your address so I will get you a money order out tomorrow. Thanks!
Russ

Re: Cab and bed sections for sale
 

Hey Russ, so like a 10x10 section is what your wanting?

Re: Cab and bed sections for sale
 

That would probably be fine Randy. 10x10 is probably bigger than I need, but might be better to have a little extra to work with. I can measure when I get home.

Re: Cab and bed sections for sale
 

Thanks Randy again, I'm happy with the roof. I got the panels cut out today, it took me about 3 hours to cut the spot welds out.

Re: Cab and bed sections for sale
 

Outer section

Re: Cab and bed sections for sale
 

Russ, I will get it cut out tomorrow

Wow Scott, you've been busy

Thanks Randy

Re: Cab and bed sections for sale
 

Randy, before I get you a money order out, do you happen to have the 2 brackets that bolt to the side of the 3speed trans that the shift linkages connect to?

Edit: looks like they are called shifter levers in the service manual

Re: Cab and bed sections for sale
 

Russ, sorry none of those right now. I got the low hump section cut out for you, it has some pitting but no rusted through

Re: Cab and bed sections for sale
 

Randy,... how much for a section of the cab floor like this.
I need the seat bracket bolt holes and enough floor to make it rigid.
I want to make a jig for cutting down/lowering seat brackets.
Left or right side will work.

Re: Cab and bed sections for sale
 

i'm looking for factory exhaust hangers for left and right that are mounted in the cross member above the rear and behind the rear wheels left and right, and original e brake cable that goes into wheel

Re: Cab and bed sections for sale
 

Keith, I scrapped this cab already, I have another out there, I can cut one out of it 20 plus shipping

Rlk, it only has one side exhaust brackets, bb trucks have dual hangers, I will look at cross member

Thanks