KS Cab and bed sections for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-29-2013, 07:37 PM

I'll try to cut some sections if anyone needs any, I have these bed pieces cut off already.
each rear section is $80 shipped. Bed floor has alot of surface rust, all underneath cab is rusted, wheel wells are rusted
ask if you need any other pieces cut off this before I haul it to scrap
roof section is sold
Thanks Randy

teeitup · 11-29-2013, 07:38 PM

mo

Undone · 11-29-2013, 07:47 PM

Driver side rear bed section for 40.00, shipping to 30530.

teeitup · 11-29-2013, 07:56 PM

It had some rust on inside, I'll get pics of it tomorrow how I had to cut it. Thanks Randy

**Cash3481** · 11-30-2013, 10:38 AM

Randy,
I'll take the ps bed tail section. What's the cost if David would pick it up for me when he gets your bed and cab?
Mike

teeitup · 11-30-2013, 04:04 PM

Undone, here are pics, let me know if you still want shipping quote

teeitup · 11-30-2013, 04:06 PM

Mike, how about $100 and this on our trade

Undone · 12-01-2013, 09:05 AM

Quote:

Originally Posted by teeitup

Undone, here are pics, let me know if you still want shipping quote

Yes, please. 30530

jjzepplin · 12-01-2013, 09:23 AM

passenger bedside to 33578? Could use a bit more than you cut out...

**Cash3481** · 12-01-2013, 10:32 AM

Quote:

Originally Posted by teeitup

Mike, how about $100 and this on our trade

Randy,
I answered this off my phone but it didn't go through.
I'll take it and towards our trade.
Mike

teeitup · 12-01-2013, 10:38 AM

UNdone, I'll get quote today

jjzepplin, sorry its sold to cash3481

Mike, sound good

Thanks Randy

jjzepplin · 12-01-2013, 11:03 AM

10-4 keep me in mind.

russgoodman · 12-01-2013, 11:24 AM

Randy, how solid is the low hump area? I know you said under the cab was rusted but not sure about the underside of the hump. I just need a small section to patch a "custom" floor shifter installation. I cut a piece but I didn't take into consideration all of the drill holes around the cutout area. First pic is to give you a good idea of the area, second pic is about the size of the patch I would need (of course my picture angle sucks - so obviously it needs to be more square and not at the crazy angle I cropped to). What do you need for that? shipping to business address 73527

teeitup · 12-01-2013, 02:27 PM

Russ I cut this whole center section out of the cab to sell I have another partial cab at work I could cut that section out for you probably be able to ship it for $25

russgoodman · 12-01-2013, 04:19 PM

Quote:

Originally Posted by teeitup

Russ I cut this whole center section out of the cab to sell I have another partial cab at work I could cut that section out for you probably be able to ship it for $25

I can do that Randy. I still have your address so I will get you a money order out tomorrow. Thanks!
Russ

teeitup · 12-01-2013, 04:26 PM

Hey Russ, so like a 10x10 section is what your wanting?

russgoodman · 12-01-2013, 05:38 PM

Quote:

Originally Posted by teeitup

Hey Russ, so like a 10x10 section is what your wanting?

That would probably be fine Randy. 10x10 is probably bigger than I need, but might be better to have a little extra to work with. I can measure when I get home.

sduckworth13 · 12-01-2013, 06:40 PM

Thanks Randy again, I'm happy with the roof. I got the panels cut out today, it took me about 3 hours to cut the spot welds out.

sduckworth13 · 12-01-2013, 06:43 PM

Outer section

teeitup · 12-01-2013, 09:37 PM

Russ, I will get it cut out tomorrow

Wow Scott, you've been busy

Thanks Randy

russgoodman · 12-02-2013, 11:24 PM

Randy, before I get you a money order out, do you happen to have the 2 brackets that bolt to the side of the 3speed trans that the shift linkages connect to?

Edit: looks like they are called shifter levers in the service manual

teeitup · 12-03-2013, 08:51 AM

Russ, sorry none of those right now. I got the low hump section cut out for you, it has some pitting but no rusted through

**lolife99** · 12-03-2013, 08:59 AM

Randy,... how much for a section of the cab floor like this.
I need the seat bracket bolt holes and enough floor to make it rigid.
I want to make a jig for cutting down/lowering seat brackets.
Left or right side will work.

rlk · 12-03-2013, 10:30 AM

i'm looking for factory exhaust hangers for left and right that are mounted in the cross member above the rear and behind the rear wheels left and right, and original e brake cable that goes into wheel

teeitup · 12-03-2013, 12:52 PM

Keith, I scrapped this cab already, I have another out there, I can cut one out of it 20 plus shipping

Rlk, it only has one side exhaust brackets, bb trucks have dual hangers, I will look at cross member

Thanks

11-29-2013, 07:37 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Cab and bed sections for sale I'll try to cut some sections if anyone needs any, I have these bed pieces cut off already. each rear section is $80 shipped. Bed floor has alot of surface rust, all underneath cab is rusted, wheel wells are rusted ask if you need any other pieces cut off this before I haul it to scrap roof section is sold Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-12-2013 at 06:08 PM.

11-29-2013, 07:38 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale mo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-29-2013, 07:47 PM	#3
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 894	Re: Cab and bed sections for sale Driver side rear bed section for 40.00, shipping to 30530.

11-29-2013, 07:56 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale It had some rust on inside, I'll get pics of it tomorrow how I had to cut it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2013, 10:38 AM	#5
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Cab and bed sections for sale Randy, I'll take the ps bed tail section. What's the cost if David would pick it up for me when he gets your bed and cab? Mike

11-30-2013, 04:04 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale Undone, here are pics, let me know if you still want shipping quote Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2013, 04:06 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale Mike, how about $100 and this on our trade Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-01-2013, 09:23 AM	#9
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,558	Re: Cab and bed sections for sale passenger bedside to 33578? Could use a bit more than you cut out... __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

12-01-2013, 10:38 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale UNdone, I'll get quote today jjzepplin, sorry its sold to cash3481 Mike, sound good Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-01-2013, 11:03 AM	#12
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,558	Re: Cab and bed sections for sale 10-4 keep me in mind. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

12-01-2013, 11:24 AM	#13
russgoodman Registered User Join Date: Oct 2012 Location: Cache, OK Posts: 458	Re: Cab and bed sections for sale Randy, how solid is the low hump area? I know you said under the cab was rusted but not sure about the underside of the hump. I just need a small section to patch a "custom" floor shifter installation. I cut a piece but I didn't take into consideration all of the drill holes around the cutout area. First pic is to give you a good idea of the area, second pic is about the size of the patch I would need (of course my picture angle sucks - so obviously it needs to be more square and not at the crazy angle I cropped to). What do you need for that? shipping to business address 73527 Attached Images __________________ 1969 Chevy C10 SWB Fleet - Build thread > http://67-72chevytrucks.com/vboard/s...d.php?t=593554 2008 GMC Sierra Denali - 6.2L AWD - my daily 2011 Ford Flex Limited - Ecoboost AWD - wife's daily 1987 Buick Regal Turbo T - 63K miles - Strip/Street car 1965 Ford Mustang Coupe - 289, c4, 53K miles

12-01-2013, 02:27 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale Russ I cut this whole center section out of the cab to sell I have another partial cab at work I could cut that section out for you probably be able to ship it for $25 __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-01-2013, 04:26 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale Hey Russ, so like a 10x10 section is what your wanting? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-01-2013, 06:40 PM	#18
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Cab and bed sections for sale Thanks Randy again, I'm happy with the roof. I got the panels cut out today, it took me about 3 hours to cut the spot welds out. Attached Images __________________ Scott

12-01-2013, 06:43 PM	#19
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Cab and bed sections for sale Outer section Attached Images __________________ Scott



Register or Log In To remove these advertisements.

12-01-2013, 09:37 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale Russ, I will get it cut out tomorrow Wow Scott, you've been busy Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-02-2013, 11:24 PM	#21
russgoodman Registered User Join Date: Oct 2012 Location: Cache, OK Posts: 458	Re: Cab and bed sections for sale Randy, before I get you a money order out, do you happen to have the 2 brackets that bolt to the side of the 3speed trans that the shift linkages connect to? Edit: looks like they are called shifter levers in the service manual __________________ 1969 Chevy C10 SWB Fleet - Build thread > http://67-72chevytrucks.com/vboard/s...d.php?t=593554 2008 GMC Sierra Denali - 6.2L AWD - my daily 2011 Ford Flex Limited - Ecoboost AWD - wife's daily 1987 Buick Regal Turbo T - 63K miles - Strip/Street car 1965 Ford Mustang Coupe - 289, c4, 53K miles

12-03-2013, 08:51 AM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale Russ, sorry none of those right now. I got the low hump section cut out for you, it has some pitting but no rusted through __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-03-2013, 08:59 AM	#23
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,692	Re: Cab and bed sections for sale Randy,... how much for a section of the cab floor like this. I need the seat bracket bolt holes and enough floor to make it rigid. I want to make a jig for cutting down/lowering seat brackets. Left or right side will work. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-03-2013, 10:30 AM	#24
rlk Registered User Join Date: Sep 2011 Location: quarryville pa Posts: 57	Re: Cab and bed sections for sale i'm looking for factory exhaust hangers for left and right that are mounted in the cross member above the rear and behind the rear wheels left and right, and original e brake cable that goes into wheel

12-03-2013, 12:52 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Cab and bed sections for sale Keith, I scrapped this cab already, I have another out there, I can cut one out of it 20 plus shipping Rlk, it only has one side exhaust brackets, bb trucks have dual hangers, I will look at cross member Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.