The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   49 door glass (https://67-72chevytrucks.com/vboard/showthread.php?t=609712)

mayor31 12-29-2013 11:57 AM

49 door glass
 
Trying to decide if I should go with the 1 piece door glass, or rebuild the vent windows and put new orginal glass in. Looks like I can do the 1 piece a lot cheaper

wood1 12-29-2013 12:12 PM

Re: 49 door glass
 
'49 had 1 piece door glass. Vent/wing windows started in '51. Good luck which ever you decide

mayor31 12-29-2013 01:45 PM

Re: 49 door glass
 
Ok thanks this is all new to me. They must of put 51 doors on this truck

MARTINSR 12-31-2013 10:44 AM

Re: 49 door glass
 
Does it have swing handle or push button? The striker is different as is the cab where the striker bolts. They will "work" when swapped but not as good as with the proper striker to latch combination. They even made an "adapter" in 51 because some doors were swing handle and some were push button.

The one on the left is a swing handle, the middle one is the "adapter" and the one on the right is the push button handle striker.

Brian

http://i200.photobucket.com/albums/a...ps5fbca090.jpg

mayor31 12-31-2013 11:49 AM

Re: 49 door glass
 
It has push button handles and has the "adapter" striker on it. Next question can I put 1 piece windows in it with out the vent? Thanks for your help

MARTINSR 12-31-2013 11:52 AM

Re: 49 door glass
 
I don't know what you need to do it, I have looked at them but never did one. I do know I dig the early look with the metal frame around the glass. :metal:

Brian

mayor31 12-31-2013 12:18 PM

Re: 49 door glass
 
I just talked to a parts dealer looks to be a lot of work to do that. might go ahead and rebuild the vent windows

mr48chev 12-31-2013 12:18 PM

Re: 49 door glass
 
It can be done. You will need the proper run for the channel in front plus the frame for the glass and I am thinking that the regulator is different.

From going back and looking at this thread http://67-72chevytrucks.com/vboard/s...d.php?t=607302 and the side photo of your truck I'd say that it is actually a 52 or 53 truck rather than a 49 or they used a 52/53 cab and a 49 title. The door handles, vent and lack of a side vent on the drivers side of the cowl are the distinguishing clues.

mayor31 12-31-2013 02:11 PM

Re: 49 door glass
 
The vent on the side of the cowl have been welded shut by previous owner. Did the 52/53 have a split windshield?. I just want to make sure I order the correct parts for my build. Thank you guys again for the help

arturo7 12-31-2013 02:14 PM

Re: 49 door glass
 
I think wing windows are great.

mayor31 12-31-2013 02:23 PM

Re: 49 door glass
 
Yes I want to keep them but I could buy the 1 piece window for what it will cost me to fix the vent window. that was my only thought and with not putting ac in the truck they would be nice to get air in the cab

mr48chev 12-31-2013 05:54 PM

Re: 49 door glass
 
Quote:

Originally Posted by mayor31 (Post 6443589)
The vent on the side of the cowl have been welded shut by previous owner. Did the 52/53 have a split windshield?. I just want to make sure I order the correct parts for my build. Thank you guys again for the help

Ok, it looked like it had original paint on it in the photo.

LMC and most of the other vendors sell the frames for the one piece windows or you can buy them used. Someone sells the channel that goes in front that the channel that goes around the glass fits in. You have to cut out the metal piece that is below the vent window but that is easy.


All times are GMT -4. The time now is 01:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com