Sway bar Bushings
I have what looks to be a front sway bar on the 75 and the bushings are old, cracked, squished (that's a technical term), oily etc etc and i was thinking about replacing them as one of the small odd upgrades I could do. From a safety perspective (and bear in mind I don't know much about these Blazer things so forgive me if i sound retarded) it looks as if the job could be done from underneath without issue. Am I missing anything here or is it simply a case of supporting the bar as you replace each end one at a time?
|
Re: Sway bar Bushings
Yes, these are fairly simple to change out. I carry the poly ones for 1-1/16" bars....
http://www.azproperformance.com/Prot...it-7-1101.html |
Re: Sway bar Bushings
is the size the THREAD size on the bar or the diameter of the bar itself?
|
Re: Sway bar Bushings
It will be the diameter of the sway bar.
|
Re: Sway bar Bushings
the diameter, i would just remove the whole bar. i like to toss a jack stank under the front of the bar. just so it doesnt fall.
|
Re: Sway bar Bushings
When you have that sway bar out, go ahead and sand and/or wire wheel it to clean it up, then paint it with some Rustoleum gloss black paint. Well worth the extra time.
|
All times are GMT -4. The time now is 07:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com