The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   MO wtb 4x4 wheel bearing spindle (https://67-72chevytrucks.com/vboard/showthread.php?t=612900)

bowhunter65 01-19-2014 04:08 PM

wtb 4x4 wheel bearing spindle
 
wtb 4x4 wheel bearing spindle 1971. I can buy a new hub and bearings, but nobody makes the spindle. I would be interested in The spindle hub and bearings. or just the spindle.

w314speed 01-19-2014 07:26 PM

Re: wtb 4x4 wheel bearing spindle
 
Is it for a K10 or K20? Thanks, Dan

bowhunter65 01-19-2014 09:39 PM

Re: wtb 4x4 wheel bearing spindle
 
It's a k10. thank you dan for clarifying that

bowhunter65 01-19-2014 09:45 PM

Re: wtb 4x4 wheel bearing spindle
 
It's a k10. thank you dan for clarifying that

JimH2828 01-20-2014 12:03 AM

Re: wtb 4x4 wheel bearing spindle
 
In 71 small bearing spindles were used. Around the mid 70s large bearing spindles came out as they held up better. I believe both work in the same hub. Do some research on Spicer 706570X.

-Jim

CUSTOM/10 01-20-2014 09:15 AM

Re: wtb 4x4 wheel bearing spindle
 
You can also use the spindle 7 hub assembly from a 73+ ( Corp. 10 bolt )
But you to replace it as an assembly, spindle, bearing & hub because the bearing are a little larger.

Gary


All times are GMT -4. The time now is 06:12 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com