!964 c10 fender seal?
 

I have a 1964 c10 that im building but the only keeping me from putting on the front is the fender seal. From lmc that part number is 38-7449 and i cant figure out how these go, Any information helps and if you can show pictures that would be great and one last thing, for the power booster what vehicles could i take it off of and it would fit there with no or little adoption.

Re: !964 c10 fender seal?
 

On my '64, that seal was attached to a metal piece with heavy staples. I will probably reattach mine with small bolts/nuts/washers. It worked fine for my radiator seals. I think some guys recreate the staples with wire if you want to be very correct. I also removed the metal piece that the seal mounts to from my fender for painting. That piece is held to the fender by 6 small metal gizmos that I don't see listed on that LMC page, but I'm sure they must sell. I ordered all my parts from Classic Truck Parts, and the snow here in GA has delayed delivery until Monday!

Re: !964 c10 fender seal?
 

I used some galvanized electric fence wire and made staples. It turned out good for my 1st time trying. I got the idea here on the forum. I used black WS adhesive where the seals needed to be glued. I taped them in place and let them sit overnight.

Re: !964 c10 fender seal?
 

thanks that really help

Re: !964 c10 fender seal?
 

ill check them hopefully and if i call they should be able to tell me if they have them.

Re: !964 c10 fender seal?
 

I also found this today. It's out of an assembly manual. Have you had a chance to get some manuals? These mentioned in the threads below helped me a lot. Good luck with your truck.

http://67-72chevytrucks.com/vboard/s...d.php?t=564999

http://67-72chevytrucks.com/vboard/s...d.php?t=522765

Re: !964 c10 fender seal?
 

Thanks for the info. I can't find my plate have no idea where it went so going to have to make something but I have and idea now on what I can do.

Re: !964 c10 fender seal?
 

Anybody know where to find the finish panel retainers?

Re: !964 c10 fender seal?
 

I ordered mine from classicparts.com. They and the new seals are on the big brown truck, set to be delivered today.

Re: !964 c10 fender seal?
 

ok, thanks. Found them. Link if anybody else needs them. Part #37-663 $.95 each http://www.classicparts.com/1960-66-.../#.Uu_Bi9iYaUk

Re: !964 c10 fender seal?
 

I need a good pair of the closing panels. The right and left sides.