!964 c10 fender seal? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

omgitsemmanuel · 01-31-2014, 10:05 PM

I have a 1964 c10 that im building but the only keeping me from putting on the front is the fender seal. From lmc that part number is 38-7449 and i cant figure out how these go, Any information helps and if you can show pictures that would be great and one last thing, for the power booster what vehicles could i take it off of and it would fit there with no or little adoption.

Old Bleu · 02-01-2014, 12:56 PM

On my '64, that seal was attached to a metal piece with heavy staples. I will probably reattach mine with small bolts/nuts/washers. It worked fine for my radiator seals. I think some guys recreate the staples with wire if you want to be very correct. I also removed the metal piece that the seal mounts to from my fender for painting. That piece is held to the fender by 6 small metal gizmos that I don't see listed on that LMC page, but I'm sure they must sell. I ordered all my parts from Classic Truck Parts, and the snow here in GA has delayed delivery until Monday!

ljackson · 02-01-2014, 02:11 PM

I used some galvanized electric fence wire and made staples. It turned out good for my 1st time trying. I got the idea here on the forum. I used black WS adhesive where the seals needed to be glued. I taped them in place and let them sit overnight.

omgitsemmanuel · 02-02-2014, 05:20 PM

thanks that really help

omgitsemmanuel · 02-02-2014, 05:29 PM

Quote:

Originally Posted by Old Bleu

On my '64, that seal was attached to a metal piece with heavy staples. I will probably reattach mine with small bolts/nuts/washers. It worked fine for my radiator seals. I think some guys recreate the staples with wire if you want to be very correct. I also removed the metal piece that the seal mounts to from my fender for painting. That piece is held to the fender by 6 small metal gizmos that I don't see listed on that LMC page, but I'm sure they must sell. I ordered all my parts from Classic Truck Parts, and the snow here in GA has delayed delivery until Monday!

ill check them hopefully and if i call they should be able to tell me if they have them.

ljackson · 02-03-2014, 07:52 AM

I also found this today. It's out of an assembly manual. Have you had a chance to get some manuals? These mentioned in the threads below helped me a lot. Good luck with your truck.

http://67-72chevytrucks.com/vboard/s...d.php?t=564999

http://67-72chevytrucks.com/vboard/s...d.php?t=522765

omgitsemmanuel · 02-03-2014, 10:36 AM

Quote:

Originally Posted by ljackson

I also found this today. It's out of an assembly manual. Have you had a chance to get some manuals? These mentioned in the threads below helped me a lot. Good luck with your truck.

http://67-72chevytrucks.com/vboard/s...d.php?t=564999

http://67-72chevytrucks.com/vboard/s...d.php?t=522765

Thanks for the info. I can't find my plate have no idea where it went so going to have to make something but I have and idea now on what I can do.

1963c-10 · 02-03-2014, 11:29 AM

Anybody know where to find the finish panel retainers?

Old Bleu · 02-03-2014, 11:34 AM

I ordered mine from classicparts.com. They and the new seals are on the big brown truck, set to be delivered today.

1963c-10 · 02-03-2014, 12:18 PM

ok, thanks. Found them. Link if anybody else needs them. Part #37-663 $.95 each http://www.classicparts.com/1960-66-.../#.Uu_Bi9iYaUk

Danny#2 · 02-03-2014, 06:40 PM

I need a good pair of the closing panels. The right and left sides.

01-31-2014, 10:05 PM	#1
omgitsemmanuel Registered User Join Date: Jan 2014 Location: Morgan Hill Posts: 18	!964 c10 fender seal? I have a 1964 c10 that im building but the only keeping me from putting on the front is the fender seal. From lmc that part number is 38-7449 and i cant figure out how these go, Any information helps and if you can show pictures that would be great and one last thing, for the power booster what vehicles could i take it off of and it would fit there with no or little adoption.

02-02-2014, 05:20 PM	#4
omgitsemmanuel Registered User Join Date: Jan 2014 Location: Morgan Hill Posts: 18	Re: !964 c10 fender seal? thanks that really help

02-03-2014, 07:52 AM	#6
ljackson Registered User Join Date: Apr 2009 Location: Amarillo, Texas Posts: 636	Re: !964 c10 fender seal? I also found this today. It's out of an assembly manual. Have you had a chance to get some manuals? These mentioned in the threads below helped me a lot. Good luck with your truck. http://67-72chevytrucks.com/vboard/s...d.php?t=564999 http://67-72chevytrucks.com/vboard/s...d.php?t=522765 Attached Images __________________ Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery.

02-03-2014, 11:29 AM	#8
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: !964 c10 fender seal? Anybody know where to find the finish panel retainers? __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-03-2014, 11:34 AM	#9
Old Bleu Registered User Join Date: Jul 2013 Location: Loganville, GA Posts: 115	Re: !964 c10 fender seal? I ordered mine from classicparts.com. They and the new seals are on the big brown truck, set to be delivered today.

02-01-2014, 12:56 PM	#2
Old Bleu Registered User Join Date: Jul 2013 Location: Loganville, GA Posts: 115	Re: !964 c10 fender seal? On my '64, that seal was attached to a metal piece with heavy staples. I will probably reattach mine with small bolts/nuts/washers. It worked fine for my radiator seals. I think some guys recreate the staples with wire if you want to be very correct. I also removed the metal piece that the seal mounts to from my fender for painting. That piece is held to the fender by 6 small metal gizmos that I don't see listed on that LMC page, but I'm sure they must sell. I ordered all my parts from Classic Truck Parts, and the snow here in GA has delayed delivery until Monday!

02-01-2014, 02:11 PM	#3
ljackson Registered User Join Date: Apr 2009 Location: Amarillo, Texas Posts: 636	Re: !964 c10 fender seal? I used some galvanized electric fence wire and made staples. It turned out good for my 1st time trying. I got the idea here on the forum. I used black WS adhesive where the seals needed to be glued. I taped them in place and let them sit overnight. Attached Images __________________ Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery.

02-03-2014, 12:18 PM	#10
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: !964 c10 fender seal? ok, thanks. Found them. Link if anybody else needs them. Part #37-663 $.95 each http://www.classicparts.com/1960-66-.../#.Uu_Bi9iYaUk __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-03-2014, 06:40 PM	#11
Danny#2 Registered User Join Date: Nov 2013 Location: Rapid City, South Dakota Posts: 83	Re: !964 c10 fender seal? I need a good pair of the closing panels. The right and left sides.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.