The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - intake question (https://67-72chevytrucks.com/vboard/showthread.php?t=617109)

jhngardner367

02-18-2014 02:10 AM

intake question

I have a 1985 c-10LB,with a 305 4bbl.
I'm going to replace the intake gaskets,soon,and I'm wondering if it will harm anything ,if I leave out the coolant restriction tabs for the intake manifold passages.

DirtyLarry

02-18-2014 02:34 AM

Re: intake question

You mean the metal piece in the middle? That is the exhaust crossover. I always left those out.

jhngardner367

02-18-2014 02:46 AM

Re: intake question

no,mine has metal tabs,with small holes in them,at the water passages to the intake. ??Near the ends of the intake mounting surfaces.

imjeff

02-18-2014 02:51 AM

Re: intake question

They limit the amount of water flow through the intake. I would put them in so you don't have too much heat in your intake.

jhngardner367

02-18-2014 02:57 AM

Re: intake question

Thanks,imjeff. I DON'T need any overheating problems. Average temps here,in Arkansas,in summer is 98/105f !

All times are GMT -4. The time now is 06:38 PM.