The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   AZ parting a 69 gmc 3/4 (https://67-72chevytrucks.com/vboard/showthread.php?t=617375)

dmartin1 02-19-2014 11:53 PM

parting a 69 gmc 3/4
 
parting a 69 gmc 3/4 ton flatbed truck.i bought it for parts i needed.

everything on the doors is up for grabs, the bed, rearend(dana 60), fuel system, factory ac parts, up for grabs.
i am keeping the column,front clip(maybe)and the steering and brake stuff.

the big mirrors- rusted but the arms and bracketry are straight with no dents.would be fine for restoration. 20$ plus shipping

any of the body trim pieces if they are decent- 10$ a piece plus shipping?

complete rearend- id take 75$ no shipping.

entire flatbed- id take 150 obo no shipping need gone comes with bumper too

ball bearing ash tray/ needs sanding and painting.is ok condition no dents 15$ plus ship

"turqoise " interior according to spid
door panels/ i gave a quick cleaning, some fading here and there.will clean up ok.fair driver condition id take 30$ plus shipping

ac vent ball trim holder thing(both)/ turqoise in pretty nice condition no cracks or anything.chrome bad on balls 15$ plus shipping

some nice aqua visors from a 67/ 20$ plus shipping

cargo light assembly/ chrome has very minor if any pitting.rubber grommet piece is in good condition. 30$ plus shipping

acdelerator pedal rod/ 5$ plus ship

steering column bracktery/ 10$ for all of it plus shipping

grey glove box door no dents, decent condition with bracket and push button and hinge id take 10$ plus shipping SOLD

set of turquoise seatbelts from the 69/ i cleaned them up a fair bit with dawn and warm water. middle buckles plastic was rotten gone but buckle is fine. light fading on some of the belts, all buckles good, retractors work as they should. some little stains here and there the plastic retractor covers are good condition. 40$ plus shipping?

passenger side older fire extinguisher bracket, not sure if its gm? it works, but needs painted or rechromed 10$ plus shipping SOLD

*if you see anything in the pics not mentioned just ask,its problly for sale.* open to offers on some of the stuff.

dmartin1 02-20-2014 12:00 AM

Re: parting a 69 gmc 3/4
 
5 Attachment(s)
pics

dmartin1 02-20-2014 12:09 AM

Re: parting a 69 gmc 3/4
 
5 Attachment(s)
more pics

too much stuff 02-20-2014 12:15 AM

Re: parting a 69 gmc 3/4
 
Hubcaps?
Extinguisher and bracket?
To 55744

michael bustamante 02-20-2014 12:44 AM

Re: parting a 69 gmc 3/4
 
what condition are those headers in?

dmartin1 02-20-2014 12:49 AM

Re: parting a 69 gmc 3/4
 
Quote:

Originally Posted by too much stuff (Post 6534750)
Hubcaps?
Extinguisher and bracket?
To 55744

How's 15 for extinguish and bracket? Shipping quote on the way.

Hubcaps are staying as for the moment.if anything changes, you are first in line.pics on bracket and extinguisher in the morning if needed

dmartin1 02-20-2014 01:05 AM

Re: parting a 69 gmc 3/4
 
Quote:

Originally Posted by michael bustamante (Post 6534786)
what condition are those headers in?

Good as far as I can see. Just rusted.look like older hooker headers? I can get you some pics tomorrow

texjake 02-20-2014 02:20 AM

Re: parting a 69 gmc 3/4
 
If you happen to remove the cowl, I'm looking for the grommet that the antenna wire feeds thru the firewall. Please let me know what condition it is in. Thanks.

michael bustamante 02-20-2014 10:29 AM

Re: parting a 69 gmc 3/4
 
Pics ll be good thanks

PICKMUP 02-20-2014 03:48 PM

Re: parting a 69 gmc 3/4
 
Next on the hubcaps...thanks, frank

kda2000 02-20-2014 04:44 PM

Re: parting a 69 gmc 3/4
 
I'll take the glove box door (grey), shipping to 78737 - can you PM me with payment info - thanks

dmartin1 02-20-2014 05:20 PM

Re: parting a 69 gmc 3/4
 
Quote:

Originally Posted by kda2000 (Post 6535636)
I'll take the glove box door (grey), shipping to 78737 - can you PM me with payment info - thanks

pm sent, sale pending

mike1971c10 02-20-2014 05:49 PM

Re: parting a 69 gmc 3/4
 
Hey, I could use those seat belts How much for all
mike

dmartin1 02-20-2014 06:59 PM

Re: parting a 69 gmc 3/4
 
Mike pm sent on belts

70STOVEBOLT 02-20-2014 07:19 PM

Re: parting a 69 gmc 3/4
 
Is the center duct still there for the a/c ? I see the chrome vent is gone but I just need the splitter duct inside the dash. Shipping would be to 46562.

Thanks,
Mark

dmartin1 02-20-2014 07:47 PM

Re: parting a 69 gmc 3/4
 
Quote:

Originally Posted by 70STOVEBOLT (Post 6535879)
Is the center duct still there for the a/c ? I see the chrome vent is gone but I just need the splitter duct inside the dash. Shipping would be to 46562.

Thanks,
Mark

are you talking about the solid plastic duct piece that goes on/behind the ac vent center top face of the dash?

70STOVEBOLT 02-20-2014 08:36 PM

Re: parting a 69 gmc 3/4
 
Yes sir

dmartin1 02-20-2014 09:07 PM

Re: parting a 69 gmc 3/4
 
Yup I got it.no cracks or broken pieces .some scratches on the plastic.but I don't believe its ever visible.nothing that would effect use or function. 6$+ ship. 11$. Sound fair?

resto newbie 02-20-2014 09:27 PM

Re: parting a 69 gmc 3/4
 
I would be interested in a high hump tranny cover if equipped and not to rusty.

dmartin1 02-21-2014 09:46 AM

Re: parting a 69 gmc 3/4
 
Resto, sorry no cover

gdavis 02-21-2014 10:43 AM

Re: parting a 69 gmc 3/4
 
how is the inside mirrow head is it in bad shape or what. how much to 34446

dmartin1 02-21-2014 10:44 AM

Re: parting a 69 gmc 3/4
 
accepting offers and will part out entire factory ac system any piece you want. do not want most of it to head to the crusher

dmartin1 02-21-2014 10:48 AM

Re: parting a 69 gmc 3/4
 
Quote:

Originally Posted by gdavis (Post 6536832)
how is the inside mirrow head is it in bad shape or what. how much to 34446

mirror head is pretty gross to be honest

70STOVEBOLT 02-21-2014 11:42 AM

Re: parting a 69 gmc 3/4
 
Quote:

Originally Posted by dmartin1 (Post 6536067)
Yup I got it.no cracks or broken pieces .some scratches on the plastic.but I don't believe its ever visible.nothing that would effect use or function. 6$+ ship. 11$. Sound fair?

I will take it, pm your payment info and I will get you paid.

Thanks,
Mark

70STOVEBOLT 02-21-2014 02:13 PM

Re: parting a 69 gmc 3/4
 
Paypal sent for a/c center duct.

Thanks again,
Mark


All times are GMT -4. The time now is 06:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com