AZ parting a 69 gmc 3/4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmartin1 · 02-19-2014, 11:53 PM

parting a 69 gmc 3/4 ton flatbed truck.i bought it for parts i needed.

everything on the doors is up for grabs, the bed, rearend(dana 60), fuel system, factory ac parts, up for grabs.
i am keeping the column,front clip(maybe)and the steering and brake stuff.

the big mirrors- rusted but the arms and bracketry are straight with no dents.would be fine for restoration. 20$ plus shipping

any of the body trim pieces if they are decent- 10$ a piece plus shipping?

complete rearend- id take 75$ no shipping.

entire flatbed- id take 150 obo no shipping need gone comes with bumper too

ball bearing ash tray/ needs sanding and painting.is ok condition no dents 15$ plus ship

"turqoise " interior according to spid
door panels/ i gave a quick cleaning, some fading here and there.will clean up ok.fair driver condition id take 30$ plus shipping

ac vent ball trim holder thing(both)/ turqoise in pretty nice condition no cracks or anything.chrome bad on balls 15$ plus shipping

some nice aqua visors from a 67/ 20$ plus shipping

cargo light assembly/ chrome has very minor if any pitting.rubber grommet piece is in good condition. 30$ plus shipping

acdelerator pedal rod/ 5$ plus ship

steering column bracktery/ 10$ for all of it plus shipping

grey glove box door no dents, decent condition with bracket and push button and hinge id take 10$ plus shipping SOLD

set of turquoise seatbelts from the 69/ i cleaned them up a fair bit with dawn and warm water. middle buckles plastic was rotten gone but buckle is fine. light fading on some of the belts, all buckles good, retractors work as they should. some little stains here and there the plastic retractor covers are good condition. 40$ plus shipping?

passenger side older fire extinguisher bracket, not sure if its gm? it works, but needs painted or rechromed 10$ plus shipping SOLD

*if you see anything in the pics not mentioned just ask,its problly for sale.* open to offers on some of the stuff.

dmartin1 · 02-20-2014, 12:00 AM

pics

dmartin1 · 02-20-2014, 12:09 AM

more pics

**too much stuff** · 02-20-2014, 12:15 AM

Hubcaps?
Extinguisher and bracket?
To 55744

**michael bustamante** · 02-20-2014, 12:44 AM

what condition are those headers in?

dmartin1 · 02-20-2014, 12:49 AM

Quote:

Originally Posted by too much stuff

Hubcaps?
Extinguisher and bracket?
To 55744

How's 15 for extinguish and bracket? Shipping quote on the way.

Hubcaps are staying as for the moment.if anything changes, you are first in line.pics on bracket and extinguisher in the morning if needed

dmartin1 · 02-20-2014, 01:05 AM

Quote:

Originally Posted by michael bustamante

what condition are those headers in?

Good as far as I can see. Just rusted.look like older hooker headers? I can get you some pics tomorrow

texjake · 02-20-2014, 02:20 AM

If you happen to remove the cowl, I'm looking for the grommet that the antenna wire feeds thru the firewall. Please let me know what condition it is in. Thanks.

**michael bustamante** · 02-20-2014, 10:29 AM

Pics ll be good thanks

**PICKMUP** · 02-20-2014, 03:48 PM

Next on the hubcaps...thanks, frank

kda2000 · 02-20-2014, 04:44 PM

I'll take the glove box door (grey), shipping to 78737 - can you PM me with payment info - thanks

dmartin1 · 02-20-2014, 05:20 PM

Quote:

Originally Posted by kda2000

I'll take the glove box door (grey), shipping to 78737 - can you PM me with payment info - thanks

pm sent, sale pending

**mike1971c10** · 02-20-2014, 05:49 PM

Hey, I could use those seat belts How much for all
mike

dmartin1 · 02-20-2014, 06:59 PM

Mike pm sent on belts

**70STOVEBOLT** · 02-20-2014, 07:19 PM

Is the center duct still there for the a/c ? I see the chrome vent is gone but I just need the splitter duct inside the dash. Shipping would be to 46562.

Thanks,
Mark

dmartin1 · 02-20-2014, 07:47 PM

Quote:

Originally Posted by 70STOVEBOLT

Is the center duct still there for the a/c ? I see the chrome vent is gone but I just need the splitter duct inside the dash. Shipping would be to 46562.

Thanks,
Mark

are you talking about the solid plastic duct piece that goes on/behind the ac vent center top face of the dash?

**70STOVEBOLT** · 02-20-2014, 08:36 PM

Yes sir

dmartin1 · 02-20-2014, 09:07 PM

Yup I got it.no cracks or broken pieces .some scratches on the plastic.but I don't believe its ever visible.nothing that would effect use or function. 6$+ ship. 11$. Sound fair?

resto newbie · 02-20-2014, 09:27 PM

I would be interested in a high hump tranny cover if equipped and not to rusty.

dmartin1 · 02-21-2014, 09:46 AM

Resto, sorry no cover

gdavis · 02-21-2014, 10:43 AM

how is the inside mirrow head is it in bad shape or what. how much to 34446

dmartin1 · 02-21-2014, 10:44 AM

accepting offers and will part out entire factory ac system any piece you want. do not want most of it to head to the crusher

dmartin1 · 02-21-2014, 10:48 AM

Quote:

Originally Posted by gdavis

how is the inside mirrow head is it in bad shape or what. how much to 34446

mirror head is pretty gross to be honest

**70STOVEBOLT** · 02-21-2014, 11:42 AM

Quote:

Originally Posted by dmartin1

Yup I got it.no cracks or broken pieces .some scratches on the plastic.but I don't believe its ever visible.nothing that would effect use or function. 6$+ ship. 11$. Sound fair?

I will take it, pm your payment info and I will get you paid.

Thanks,
Mark

**70STOVEBOLT** · 02-21-2014, 02:13 PM

Paypal sent for a/c center duct.

Thanks again,
Mark

02-19-2014, 11:53 PM	#1
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	parting a 69 gmc 3/4 parting a 69 gmc 3/4 ton flatbed truck.i bought it for parts i needed. everything on the doors is up for grabs, the bed, rearend(dana 60), fuel system, factory ac parts, up for grabs. i am keeping the column,front clip(maybe)and the steering and brake stuff. the big mirrors- rusted but the arms and bracketry are straight with no dents.would be fine for restoration. 20$ plus shipping any of the body trim pieces if they are decent- 10$ a piece plus shipping? complete rearend- id take 75$ no shipping. entire flatbed- id take 150 obo no shipping need gone comes with bumper too ball bearing ash tray/ needs sanding and painting.is ok condition no dents 15$ plus ship "turqoise " interior according to spid door panels/ i gave a quick cleaning, some fading here and there.will clean up ok.fair driver condition id take 30$ plus shipping ac vent ball trim holder thing(both)/ turqoise in pretty nice condition no cracks or anything.chrome bad on balls 15$ plus shipping some nice aqua visors from a 67/ 20$ plus shipping cargo light assembly/ chrome has very minor if any pitting.rubber grommet piece is in good condition. 30$ plus shipping acdelerator pedal rod/ 5$ plus ship steering column bracktery/ 10$ for all of it plus shipping grey glove box door no dents, decent condition with bracket and push button and hinge id take 10$ plus shipping SOLD set of turquoise seatbelts from the 69/ i cleaned them up a fair bit with dawn and warm water. middle buckles plastic was rotten gone but buckle is fine. light fading on some of the belts, all buckles good, retractors work as they should. some little stains here and there the plastic retractor covers are good condition. 40$ plus shipping? passenger side older fire extinguisher bracket, not sure if its gm? it works, but needs painted or rechromed 10$ plus shipping SOLD if you see anything in the pics not mentioned just ask,its problly for sale. open to offers on some of the stuff. __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more Last edited by dmartin1; 02-23-2014 at 01:24 PM.

02-20-2014, 12:00 AM	#2
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: parting a 69 gmc 3/4 pics Attached Images __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

02-20-2014, 12:09 AM	#3
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: parting a 69 gmc 3/4 more pics Attached Images __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

02-20-2014, 12:15 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: parting a 69 gmc 3/4 Hubcaps? Extinguisher and bracket? To 55744 __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-20-2014, 12:44 AM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: parting a 69 gmc 3/4 what condition are those headers in? __________________ 1967custom

02-20-2014, 02:20 AM	#8
texjake Registered User Join Date: Nov 2013 Location: Lubbock, TX Posts: 283	Re: parting a 69 gmc 3/4 If you happen to remove the cowl, I'm looking for the grommet that the antenna wire feeds thru the firewall. Please let me know what condition it is in. Thanks. __________________ "Now all I need is a shop to go with my shop vac!"

02-20-2014, 10:29 AM	#9
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: parting a 69 gmc 3/4 Pics ll be good thanks __________________ 1967custom

02-20-2014, 03:48 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: parting a 69 gmc 3/4 Next on the hubcaps...thanks, frank __________________ Email: frankeham@comcast.net Phone: 360-956-7170

02-20-2014, 04:44 PM	#11
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: parting a 69 gmc 3/4 I'll take the glove box door (grey), shipping to 78737 - can you PM me with payment info - thanks

02-20-2014, 05:49 PM	#13
mike1971c10 Senior Member Join Date: May 2012 Location: phoenix az Posts: 452	Re: parting a 69 gmc 3/4 Hey, I could use those seat belts How much for all mike __________________ my build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522167 vietnam vet 67-68

02-20-2014, 06:59 PM	#14
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: parting a 69 gmc 3/4 Mike pm sent on belts __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

02-20-2014, 07:19 PM	#15
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: parting a 69 gmc 3/4 Is the center duct still there for the a/c ? I see the chrome vent is gone but I just need the splitter duct inside the dash. Shipping would be to 46562. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-20-2014, 08:36 PM	#17
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: parting a 69 gmc 3/4 Yes sir __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-20-2014, 09:07 PM	#18
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: parting a 69 gmc 3/4 Yup I got it.no cracks or broken pieces .some scratches on the plastic.but I don't believe its ever visible.nothing that would effect use or function. 6$+ ship. 11$. Sound fair? __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

02-20-2014, 09:27 PM	#19
resto newbie Registered User Join Date: Apr 2012 Location: Hartselle, Alabama Posts: 330	Re: parting a 69 gmc 3/4 I would be interested in a high hump tranny cover if equipped and not to rusty.



Register or Log In To remove these advertisements.

02-21-2014, 09:46 AM	#20
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: parting a 69 gmc 3/4 Resto, sorry no cover __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

02-21-2014, 10:43 AM	#21
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: parting a 69 gmc 3/4 how is the inside mirrow head is it in bad shape or what. how much to 34446 __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

02-21-2014, 10:44 AM	#22
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: parting a 69 gmc 3/4 accepting offers and will part out entire factory ac system any piece you want. do not want most of it to head to the crusher __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

02-21-2014, 02:13 PM	#25
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: parting a 69 gmc 3/4 Paypal sent for a/c center duct. Thanks again, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.