The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Dakota Digital ECD-100 (https://67-72chevytrucks.com/vboard/showthread.php?t=617988)

lutronjim

02-24-2014 03:35 PM

Dakota Digital ECD-100

Wondering if anyone has any experience using this unit to drive mechanical speedo .

Planning LC9 and L465E swap into my 70 Chev C10 pickup and want to keep original speedo. The VSS from the tranny will be needed for PCM. I have read from post that splitting VSS signal to PCM caused shifting problems.

Don't know if VSS output from PCM would work or not. GM says its 'not scaled' whatever that means.

I also looked at Cable-X unit but read of several problems.

Thanks

truckdude239

02-24-2014 07:40 PM

Re: Dakota Digital ECD-100

I have a wire commi g off my pcm labeled speedo speedo will pull from the computer

All times are GMT -4. The time now is 08:18 AM.