Gas pedal swap DBW
 

Hi all,
My foot and leg are getting tired of the pedal location of my 2011 5.3 DBW pedal. I have seen where you can use a Corvette or Monte Carlo DBW pedal but just need to switch two wires, does anyone know what I have to do to make it work?

Thanks,

Ben

Re: Gas pedal swap DBW
 

It's pin D and F that need to be swapped at the pedal connector to use a Corvette or Monte Carlo pedal. I found a new in the box GM DBW Monte Carlo pedal on eBay for $25 when I did the swap in my '57 BelAir. The GM part number is 25830024 and it usually runs around $100. There are aftermarket OEM replacement pedals available for around $60.

Re: Gas pedal swap DBW
 

Awesome, thanks Dayj1!!

Re: Gas pedal swap DBW
 

One more dayj1, is the pigtail the same? Will the truck one plug into the others?

Thanks!

Re: Gas pedal swap DBW
 

The connectors are the same. Just swap the two wires dayj1 spoke about.

Re: Gas pedal swap DBW
 

Thanks, you guys are awesome!! I do not understand all the wireing diagrams and you all are a big help!!

Re: Gas pedal swap DBW
 

Is there a preference for the corvette one or monte one, or are they about the same?

Re: Gas pedal swap DBW
 

I used the corvette one because I like the way it mounted and the plastic pedal was identical to the factory pedal in the 71/72 trucks, :metal:.

Re: Gas pedal swap DBW
 

Cool, thanks again!

Re: Gas pedal swap DBW
 

Just bought a corvette on for $58 on eBay!

Re: Gas pedal swap DBW
 

I assume you mean the pedal, cuz if you just bought a whole vette for $58 your a god.

Re: Gas pedal swap DBW
 

Lol, yup the pedal. Was supposed to be one not on