parting out 68 short bed.
 

I bought either a late 67 or 68 short bed from another forum member. All I need off it is the frame. It is pretty well complete minus the interior. The cab is shot, but has good glass. The front fenders, hood and core support are all use able, but have repair needs. Let me know what you need pictures of and i will post them up. I have the motor and trans as well. Motor is a 6 cylinder and trans is a 3 speed on the tree. Its a 6 lug truck. The grille is in very good shape. I can have any parts media blasted and primer etched if the buyer would like that done as well.
I basically want to get rid of the whole dang truck at once if possible. I'll sell all the sheet metal, motor and trans for 500 bucks. I'll sell the entire suspension for 250. Im located in northwest missouri, phone is 660-924-6375. Thanks, Ryan

Re: parting out 68 short bed.
 

hello Iam Dan from Creston, I called about pictures of your bed and tailgate. thanks

Re: parting out 68 short bed.
 

I've already had a call wanting pictures. So here they are. Just let me know if you need any specific pictures of anything not shown. I have all of the sheet metal off of the frame and on my trailer as of now. I'll be pulling the motor and trans today. Still undecided if I'm going to use the suspension or not.

http://s265.photobucket.com/user/bbc...d%20part%20out

Re: parting out 68 short bed.
 

Ryan - you are quick! Sheet metal off, ready to pull motor / trans. - WOW you're fast :) Jay

Great to meet you Saturday. Good luck with the part out!

Re: parting out 68 short bed.
 

Yes sir it was great to meet you as well!

Re: parting out 68 short bed.
 

It was just brought to my attention that the steering wheel that came with the truck and the one that is pictured is different! Sorry about any confusion, I do not have the steering wheel pictured! I did however go back through the pictures and everything else looks to be correct.

Re: parting out 68 short bed.
 

How much for the grill and hoops separate. Any better pics?
I only NEED the hoops but am interested in the grill too. shipping to 67110.
Mike

Re: parting out 68 short bed.
 

Hoops? Are you referring to the bezels? I'd go $20 bucks for the bezels plus shipping. For the grille $100 plus shipping. I can get you better pics tomorrow. I just got done pulling the motor and trans from the frame and I'm smoked! Thanks
Ryan

Re: parting out 68 short bed.
 

Most people call the long oval shaped trim pieces around the grill "hoops".
The bezels are usually around the headlights. The turn signals are inside these hoops . If that helps you any? Let me know and I understand the feelings after a long day of parting. If it's the hoops for $20 I'll take it and you can text me some better pics of the grill.
Mike

Re: parting out 68 short bed.
 

Will you sell what is left? PM me please..

Re: parting out 68 short bed.
 

Id rather keep the grille all together. Ill get you some good pictures this morning.

Re: parting out 68 short bed.
 

Yes sir. Pm sent!

Re: parting out 68 short bed.
 

Re: parting out 68 short bed.
 

Sorry about that! I should have read the rules and I did not. My fault and appoogies!

I basically want to get rid of the whole dang truck at once if possible. I'll sell all the sheet metal, motor and trans for 500 bucks. I'll sell the entire suspension for 250.

Re: parting out 68 short bed.
 

Quite alright and thank you. :)


.

Re: parting out 68 short bed.
 

It's been raining nonstop all day. I will get more pictures up tomorrow if the rain quits. Sorry for the delay!

Re: parting out 68 short bed.
 

Grille has some dings and dents. Also two holes were drilled in the bottom for some sort of fog light set. The hoops have a few dings and dents in the upper, however the lower looks pretty good. I also have the original bowtie for the center.


http://i265.photobucket.com/albums/i...ps7nsyadwp.jpg
http://i265.photobucket.com/albums/i...psqqxxlggj.jpg

Re: parting out 68 short bed.
 

Do you have the rear gear ratio and know whether it is limited slip?

John

Re: parting out 68 short bed.
 

No sir I don't, I can however find out for you.

Re: parting out 68 short bed.
 

That would be great! Much appreciated!