1970 swb 4x4 frame
 

sold sold sold


ok guys not perfect but the price reflects that. this is a real swb 4x4 frame with title vin plate glovebox door and the frame numbers match. it is decent but someone put a homemade step that put too much flex on the rail and there is a crack on the bottom of the rail. it is fixable with a good weld also it will need a new crossmember behind the cab and a few extra things like a hitch and some dumb bumper brackets ground off of it. may need very slight attention on the last two inches of the frame rail but hitch should be removed to be sure. like I said this isn't perfect but it is a real one for those of you who are looking for the numbers. it was a 292 4 speed with manual brakes and steering and not much else. has the 292 crossmember. It is a roller with a 12 bolt rear and a later 10 bolt disc front. also has a sm465 and np205 and was upgraded to power steering so it has a good box. will come complete with everything shown in pic and all the papers

Re: 1970 swb 4x4 frame
 

Interested. Any chance you come south towards Atlantic City?

Re: 1970 swb 4x4 frame
 

I was there last week in toms river. I can figure delivery into it if you have no way of getting it. just figure tolls and fuel

Re: 1970 swb 4x4 frame
 

ttt. this is a very fixable frame. nothing too far gone.

Re: 1970 swb 4x4 frame
 

if paid for what would be your time frame to get it picked up? I am about 450 miles away but will be in DC right after memorial day.

Thanks,
Steve

Re: 1970 swb 4x4 frame
 

yea if paid for I could wait till then. if you are seriously interested let me know and I can go over it with you

Re: 1970 swb 4x4 frame
 

I will get in contact tomorrow, winding down for the day. PM me your number and i will call when I get home tomorrow.

Thanks,
Steve

Re: 1970 swb 4x4 frame
 

ttt open to offers

Re: 1970 swb 4x4 frame
 

ttt

Re: 1970 swb 4x4 frame
 

ttt. lets get this thing to a new home.

Re: 1970 swb 4x4 frame
 

Shame you are 2 hrs away

Re: 1970 swb 4x4 frame
 

come on guys someone must need this.

Re: 1970 swb 4x4 frame
 

Willing to part out? Looking for 4 speed, bell housing, transfer case, drive shafts.

Re: 1970 swb 4x4 frame
 

pm sent

Re: 1970 swb 4x4 frame
 

ttt

Re: 1970 swb 4x4 frame
 

ttt

Re: 1970 swb 4x4 frame
 

Good Lord, I Wish I Was Closer. What A Shame. Not Worth A Two Hour Drive? I Don't Need It But I Would Buy It On General Principle.

Re: 1970 swb 4x4 frame
 

its unbelievable it seems everyone wants it for nothing or thy are afraid of putting a little time into it.

Re: 1970 swb 4x4 frame
 

How long could you hold it if paid for in full? I am in Charlotte NC apx 11 hour drive and it would be a couple of weeks before I could drive up to get it.

Re: 1970 swb 4x4 frame
 

If you decide to part out, please put me in line for the engine cross member.

Re: 1970 swb 4x4 frame
 

I could hold it a few more weeks. it needs work I wont lie but I think its savable with a little time and effort

Re: 1970 swb 4x4 frame
 

I am trying to work out my schedule to come and pick up the frame. Would you be available this Sat morning? I would need to be at your place around 9am Sat to get loaded up and headed back.
Melvin

Re: 1970 swb 4x4 frame
 

pm sent

Re: 1970 swb 4x4 frame
 

I will take it for 350. I will pick it up Sat morning

Thanks,
Melvin

Re: 1970 swb 4x4 frame
 

sold. thanks Melvin it was a pleasure.