NJ 1970 swb 4x4 frame

[bigrigpardo]

sold sold sold


ok guys not perfect but the price reflects that. this is a real swb 4x4 frame with title vin plate glovebox door and the frame numbers match. it is decent but someone put a homemade step that put too much flex on the rail and there is a crack on the bottom of the rail. it is fixable with a good weld also it will need a new crossmember behind the cab and a few extra things like a hitch and some dumb bumper brackets ground off of it. may need very slight attention on the last two inches of the frame rail but hitch should be removed to be sure. like I said this isn't perfect but it is a real one for those of you who are looking for the numbers. it was a 292 4 speed with manual brakes and steering and not much else. has the 292 crossmember. It is a roller with a 12 bolt rear and a later 10 bolt disc front. also has a sm465 and np205 and was upgraded to power steering so it has a good box. will come complete with everything shown in pic and all the papers

[72gmguy]

Interested. Any chance you come south towards Atlantic City?

[bigrigpardo]

I was there last week in toms river. I can figure delivery into it if you have no way of getting it. just figure tolls and fuel

[bigrigpardo]

ttt. this is a very fixable frame. nothing too far gone.

[qksilver]

if paid for what would be your time frame to get it picked up? I am about 450 miles away but will be in DC right after memorial day.

Thanks,
Steve

[bigrigpardo]

yea if paid for I could wait till then. if you are seriously interested let me know and I can go over it with you

[qksilver]

I will get in contact tomorrow, winding down for the day. PM me your number and i will call when I get home tomorrow.

Thanks,
Steve

[bigrigpardo]

ttt open to offers

[bigrigpardo]

ttt

[bigrigpardo]

ttt. lets get this thing to a new home.

[Ozzy2013]

Shame you are 2 hrs away

[bigrigpardo]

come on guys someone must need this.

[Dale_Brown]

Willing to part out? Looking for 4 speed, bell housing, transfer case, drive shafts.

[bigrigpardo]

pm sent

[bigrigpardo]

ttt

[bigrigpardo]

ttt

[Tumbleweed1C4]

Good Lord, I Wish I Was Closer. What A Shame. Not Worth A Two Hour Drive? I Don't Need It But I Would Buy It On General Principle.

[bigrigpardo]

its unbelievable it seems everyone wants it for nothing or thy are afraid of putting a little time into it.

[Seanext]

How long could you hold it if paid for in full? I am in Charlotte NC apx 11 hour drive and it would be a couple of weeks before I could drive up to get it.

[BlueMule72]

If you decide to part out, please put me in line for the engine cross member.

[bigrigpardo]

Originally Posted by Seanext

How long could you hold it if paid for in full? I am in Charlotte NC apx 11 hour drive and it would be a couple of weeks before I could drive up to get it.

I could hold it a few more weeks. it needs work I wont lie but I think its savable with a little time and effort

[Seanext]

I am trying to work out my schedule to come and pick up the frame. Would you be available this Sat morning? I would need to be at your place around 9am Sat to get loaded up and headed back.
Melvin

[bigrigpardo]

pm sent

[Seanext]

I will take it for 350. I will pick it up Sat morning

Thanks,
Melvin

[bigrigpardo]

sold. thanks Melvin it was a pleasure.