oops need some help
 

Ok what happened?2 1/2 dropped spindles.I used the springs that was on the truck.I thought the springs were standard with a little sag.But there straight and the same length.And uncut.So what spring would I need to fix this mess.Attachment 1249139

Re: oops need some help
 

I don't see whats wrong.........unless you didn't think it was going to drop that much.

Re: oops need some help
 

you need one more lug nut as far as I can tell.

Re: oops need some help
 

Well after cutting out the rear and dropping it on the bump stops.it has less suspension
Travel on the front.The wheel is hitting on the inner fenders.So the truck need to come
up some.So how much would the stock spring lift it up?The springs that were on the truck were not installed right.So I have know idea what the ride highth was if they were in properly.

Re: oops need some help
 

if your truck is really bouncy in the front end then you need some new shocks, it looks like you got a couple inches between your tire and inner fender now.

Re: oops need some help
 

Right now no shocks and its only about 1/2" to the
inner fender.