The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 250 to a 292 (https://67-72chevytrucks.com/vboard/showthread.php?t=630626)

hotrod66

05-29-2014 06:35 PM

250 to a 292

i was wondering if any one knew if there was any difference in the passenger side motor mount for the 292 or if it is the same one just moved forward.
thanks

padresag

05-29-2014 06:45 PM

Re: 250 to a 292

292 has a different passenger side perch
ron

paintman

05-29-2014 09:38 PM

Re: 250 to a 292

when I did the switch my 292 it had a slightly different bolt pattern on the passenger side. I was able to use the bottom 2 holes, but the top hole was way off. I had to weld/fill in the hole and re-drill the mount.

Shaky

05-30-2014 07:59 AM

Re: 250 to a 292

2 Attachment(s)

Quote:

Originally Posted by padresag (Post 6698574)

292 has a different passenger side perch
ron

Indeed. It's located differently. The pic below of the fresh painted engine is a 250. See that the engine mount is aft of the fuel pump. The dirty engine is a 292 and you can see (sorta) that the fuel pump is aft of the mount.

All times are GMT -4. The time now is 11:24 AM.