2010 Camaro exhaust manifold
 

I am needing gaskets for my 2010 camaro exhaust manifolds. The local parts stores are having a hard time getting the right ones. Does anybody have a part number for the 2 hole flange gaskets between the manifold and flange? My flange has a circle groove cut in it and has 2 bolts.

Re: 2010 Camaro exhaust manifold
 

Here is a pic of the exhaust pipe.

Re: 2010 Camaro exhaust manifold
 

GM shows part number is 92202326. The "local-parts-store equivalent" is Fel-Pro 61431. But that's a flat gasket with 2 "ears".

With that groove that you show, it sure looks like it would take a ring type gasket. I searched RockAuto just for grins and they show Fel-Pro 61012 which is a ring type seal.

Re: 2010 Camaro exhaust manifold
 

Thanks dayj1. That felpro 61431 or g1050 is suppose to be the same is what the parts store ordered but it was a bigger diameter than my flange. The bolt holes were to far apart and would not line up. I might try the ring style gasket. I bought these manifolds on eBay and they where supposed to be 2010 Camaro.

Re: 2010 Camaro exhaust manifold
 

post a pic of the manifold.

Re: 2010 Camaro exhaust manifold
 

That's the ring style gasket

Re: 2010 Camaro exhaust manifold
 

Manifold is smooth. I will try to get a pic this evening.
Thanks truckdude. Do you mean just the chrush ring without the 2 hole flange?

Re: 2010 Camaro exhaust manifold
 

Strange, as different places give different results. Rock Auto only lists 1, the regular crush-fit gasket like some of the trucks use.

http://www.rockauto.com/getimage/get...12_P04_TOP.jpg

But Summit shows the 2-bolt "flat" gaskets with all of their mid-pipe kits.

Re: 2010 Camaro exhaust manifold
 

It should be the GM part number listed earlier in this thread...

http://www.gmpartsdirect.com/catalog/frameset.cfm

I'll see if my gaskets have a PN on them when I get home in the morning though.

Re: 2010 Camaro exhaust manifold
 

Well I took a shot in the dark and had oreilly's order a 2008 pontiac g8 exhaust manifold to pipe crush gasket and it was the right one. Thanks for all the help guys. Here is the Fel-Pro number if anyone needs it #61519