The 1947 - Present Chevrolet & GMC Truck Message Board Network - IA Original style brass block fitting for oil pressure line

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - IA Original style brass block fitting for oil pressure line (https://67-72chevytrucks.com/vboard/showthread.php?t=633994)

LockDoc

06-27-2014 09:22 PM

Original style brass block fitting for oil pressure line

1 Attachment(s)

-
I have a few new fittings that screw into the oil pressure port on the GM blocks. It’s for the 1/8” line that goes to the oil pressure gauge. These fittings will fit the original GM oil pressure lines with the compression sleeve nuts on them. They are $5 each shipped.

PayPal or Money Order works for me.

Per board rules post in thread before sending any PM's

Thanks,
LockDoc

HIGHWAY BY THE SEA

06-28-2014 11:38 AM

Re: Original style brass block fitting for oil pressure line

PM sent.

LockDoc

06-28-2014 01:27 PM

Re: Original style brass block fitting for oil pressure line

Quote:

Originally Posted by HIGHWAY BY THE SEA (Post 6739497)

PM sent.

PM returned.

LockDoc

crane.fletcher

01-19-2016 08:07 PM

Re: Original style brass block fitting for oil pressure line

LocDoc

Do you still have any of those fittings ?

Thanks

LockDoc

01-20-2016 12:45 PM

Re: Original style brass block fitting for oil pressure line

Quote:

Originally Posted by crane.fletcher (Post 7453875)

LocDoc

Do you still have any of those fittings ?

Thanks

Yes I do.... PM sent.

LockDoc

michael bustamante

01-20-2016 12:49 PM

Re: Original style brass block fitting for oil pressure line

do i need this to run an original oil guage to an ls motor?

LockDoc

01-20-2016 01:14 PM

Re: Original style brass block fitting for oil pressure line

Quote:

Originally Posted by michael bustamante (Post 7454598)

do i need this to run an original oil guage to an ls motor?

Yes, but you will need an adapter like this...

http://www.summitracing.com/parts/ATM-2268/

to screw into your LS block where the original oil sender is or you can break the plastic off of the electric oil sender that's in it and drill and tap it to 1/8" NPT thread. Then screw this fitting in.

LockDoc

michael bustamante

01-20-2016 06:43 PM

Re: Original style brass block fitting for oil pressure line

Quote:

Originally Posted by LockDoc (Post 7454629)

great thank you

Oddfire

01-20-2016 06:46 PM

Re: Original style brass block fitting for oil pressure line

If you have 2 left i'll take them. Jamie71:gmc2:Longhorn

crane.fletcher

01-20-2016 07:04 PM

Re: Original style brass block fitting for oil pressure line

Quote:

Originally Posted by LockDoc (Post 7454596)

Yes I do.... PM sent.

LockDoc

I would like to purchase one of those little jewels..I have pay pal

crane.fletcher

01-20-2016 07:04 PM

Re: Original style brass block fitting for oil pressure line

I would like to purchase one of those little jewels..I have pay pal ...thanks

Minnz

01-21-2016 10:03 AM

Re: Original style brass block fitting for oil pressure line

I would also be interested in one if you have any left.

Thanks

Undone

01-21-2016 12:43 PM

Re: Original style brass block fitting for oil pressure line

I'll take on also.

cgster

08-07-2016 11:43 PM

Re: Original style brass block fitting for oil pressure line

LockDoc, you still have some of these left, I need one. Thanks.

LockDoc

08-08-2016 12:47 AM

Re: Original style brass block fitting for oil pressure line

Quote:

Originally Posted by cgster (Post 7676806)

LockDoc, you still have some of these left, I need one. Thanks.

PM sent.

LockDoc

70 stepside

11-01-2016 11:26 PM

Re: Original style brass block fitting for oil pressure line

Lock Doc..do you 2 of the fittings available

Bgrdmoose

11-02-2016 08:12 AM

Re: Original style brass block fitting for oil pressure line

I'll take 1 if still available.
Thanks

LockDoc

11-02-2016 09:05 AM

Re: Original style brass block fitting for oil pressure line

Quote:

Originally Posted by 70 stepside (Post 7758411)

Lock Doc..do you 2 of the fittings available

Which fittings do you mean? Block adapter, line fittings, or complete lines.

Quote:

Originally Posted by Bgrdmoose (Post 7758533)

I'll take 1 if still available.
Thanks

PM sent....

Thanks,
LockDoc

70 stepside

11-02-2016 01:36 PM

Re: Original style brass block fitting for oil pressure line

My apologies...2 of the block adapter fittings.

LockDoc

11-02-2016 09:12 PM

Re: Original style brass block fitting for oil pressure line

Quote:

Originally Posted by 70 stepside (Post 7758755)

My apologies...2 of the block adapter fittings.

Yes I do. PM sent....

LockDoc

cjnelson654

07-01-2023 09:22 PM

Re: Original style brass block fitting for oil pressure line

LocDoc, do you have any of the complete oil pressure kits left? I sure could use one!

All times are GMT -4. The time now is 10:51 PM.