The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - CPP spindles with stock calipers (https://67-72chevytrucks.com/vboard/showthread.php?t=639345)

rip2174

08-12-2014 04:52 PM

CPP spindles with stock calipers

Ok getting the front end back together. Can't afford to upgrade brakes right now. Went with the CPP drop spindles. Had to buy the HD 1.25 rotors to go on spindles. Was told I could use stock calipers , just needed to order a bracket from CPP to attach stock calipers to spindles. Attached bracket and calipers with new pads wont fit over the rotor. Gap between pads fully retracted piston is 1.125. Do I need different calipers? Any feed back would be nice.

lolife99

08-12-2014 05:24 PM

Re: CPP spindles with stock calipers

You have to use HD calipers to match your HD rotors.

rip2174

08-13-2014 07:51 PM

Re: CPP spindles with stock calipers

LOL. That makes sense. Picked them up today for 14 bucks a piece. All slide together nicely.

All times are GMT -4. The time now is 03:15 AM.